Insert the power plug securely into the wall outlet and ensure that the power connector is
securely plugged into the projector.
If the plug is not inserted correctly, electric shocks or overheating will result.
Do not use a broken power plugs which are damaged or wall outlets which are coming
loose from the wall.
When the hands are wet, do not touch the power plug or the power connector. Otherwise,
it will easily lead to electric shocks.
Do not overload the wall outlet.
If the power supply is overloaded (for example: inserting too many power plugs),
overheating may occur and fire will result..
Clean the power plug regularly to to prevent it from becoming covered in dust..
Failure to observe this will cause a fire.
If dust builds up on the power plug, the resulting humidity can damage the insulation.
Caution: If the device on the side of the power outlet is not grounded with the provided
power cord, it may lead to electric shocks.
Important safety tips!
3
Warning: Power
The wall outlet or the circuit breaker shall be installed near the equipment and shall be
easily accessible when problems occur.. If the following problems occur, cut off the
power supply immediately.
Continued use of the projector in these conditions will result in fire or electric shocks or
visual impairment.
If foreign objects or water gets inside the projector, cut off the power supply.
If the projector is dropped or the cabinet is damaged, cut off the power supply.
If you notice smoke, strange smell, or noise coming from the projector, cut off the
power supply.
Please contact an Authorized Service Center for repairs. Do not attempt to repair the
projector yourself.
During a thunderstorm, do not touch the projector and cables. Electric shocks can result.
Do not do anything that might damage the power cord or the power plug. If the power
cord is used while damaged, electric shocks, short circuits, or fire will result.
Do not damage the power cord, make any modifications to it, bend it excessively, twist it,
pull it, or wrap it into a bundle, or place it near any hot objects or place heavy objects on
top of it.
Do not use the anything other than the ptovided power cord. Otherwise, it may result in
electric shocks or fire.