Important safety tips!
4
On use/installation
Do not place the projector on soft materials such as carpets or sponge mats. Doing so
will cause the projector to overheat, which can cause burns, fire, or damage to the projector.
Do not set up the projector in humid or dusty places, or in places where the projector
may come into contact with oily smoke or steam.
Using the projector under such conditions will result in fire, electric shocks, or components
deterioration. Oil may also deform the plastic and the projector may fall down, such as
when mounted on the ceiling.
Do not install the projector in a place which is not strong enough to take the full weight
of the projector or on top of a surface which is sloped or unstable. Failure to observe this
will cause the projector to fall down or tip over the projector, and personal injury or
equipment damage could result.
Do not install the projector in a place where people can pass.
People may bump into the projector or trip over the power cord, which may result in fire,
electric shocks, or injury.
Warning:
Do not cover the air intake/ the air exhaust port. Doing so will cause the projector to
overheat, which can cause fire or damage to the projector.
●Do not place the projector in narrow, badly ventilated places.
●Do not place the projector on cloth or papers, as thses materials could be easily
drawn into the air intake port.
●Keep at least 1m (39-3/8'') between the air exhaust port and any wall or object,
and keep at least 50cm (19-11/16'') between the air intake port and any wall or object.
Do not look or place your hands directly into the lights emitted from the lens, while the
projector is being used.
Do not use optical devices such as magnifiers or mirrors to enter the projection beam.
Doing so can cause burns or impaired vision.
●Strong light is emitted from the projector’s lens. Do not look or place your
hands directly into this light.
●Be especially careful not to let children look into the lens. In addition, turn off
the power and disconnect the power plug when you are away from the projector.
Never attempt to remodel or disassemble the projector.
High voltage can cause accidents such as fire or electric shocks.
●For any inspection, adjustment and repair work, please contact an Authorized
Service Center.
Avoid metal objects, flammable materials or liquids entering into the projector.
Do not get the projector wet. Otherwise, it may cause a short circuit or excessive
temperature, thus resulting in accidents such as fire, electric shocks, etc. or projector failure.
●Do not place liquid containers or metal objects near the projector.
●If liquid gets inside the projector, consult your distributor.
●Please pay special attention to children.
Use an authorized ceiling mount bracket.
Using an unauthorized ceiling mount bracket may cause the machine to fall.
●Install the attached safety cables on the ceiling mount bracket to avoid dropping of the