Important safety tips!
5
Installation work should only be carried out by a qualified technician, such as lifting
the projector to the ceiling.
Improper fixing during installation may result in personal injury or electric shocks.
●Accessories
Do not use or handle the batteries improperly, and refer to the instructions below.
Failure to observe this will cause burns, batteries to leak, overheat, explode, or catch fire.
●Do not use unspecified batteries.
●Do not charge dry cell batteries.
●Do not disassemble dry cell batteries.
●Do not heat the batteries or place them into water or fire.
●Do not allow the + and - terminals of the batteries to come into contact with metallic
objects such as necklaces or hairpins.
●Do not store or carry batteries with metallic objects.
●Store the batteries in a plastic bag and keep them away from metallic objects.
●Make sure the polarities (+ and -) are correct when inserting the batteries.
●Do not use a new battery together with an old battery or mix different types of batteries.
●Do not use batteries with the outer cover peeling away or removed.
If the battery fuild leaks, do not touch it with bare hands and take the following measures
if necessary.
●Battery fuild on your skin or clothing could recult in skin inflammation or injury. Rinse
with clean water and seek medical advice immediately.
●Battery fuild coming in contact with your eyescould recult in loss of sight. In this case, do
not rub your eyes. Rinse with clean water and seek medical advice immediately.
Do not allow children to reach the batteries.
Accidental swallowing of accessories can harm your body.
●If swallowed, seek medical advice immediately.
Remove the empty batteries from the remote control immediately.
●If the emptybatteries are left in the remote control, it may cause the batteries fluid to
leak, the internal temperature to rise abnormally, or even explode.
Precautions
●Power
When disconnectingthe power cord, hold the plug and power connector.
If the power cord is pulled, the lead will become damaged and fire, short circuits, or serious
electric shocks will result.
When not using the projector for an extended period of time, disconnect the power plugfrom
the wall outlet. Failure to observe this may result in fire or electric shocks.