19
RolliBot RolliCOOL 208-20V2 Portable AC User Manual
5.3 – Cool Mode
With this mode, the unit will turn on and cool the room to the chosen temperature.
1. Press the power button on the control panel.
2. Press the mode button on the control panel until the display’s COOL light turns on.
3. Use the up and down buttons to set the desired temperature 62~86°F (16~30°C).
4. Use the speed button to switch between fan speeds.
You must attach the drainage hose to the upper draining opening when using cool mode.
In cool mode, the unit will not turn on if the chosen temperature is higher than the indoor temperature.
5.4 – Dehumidify Mode
With this mode, the unit will turn on and begin removing moisture from the air.
1. Make sure to connect the drainage tube to the upper drainage opening. Set a container near
the unit to collect the water. Then place the other end of the drainage tube in the container.
2
.
Press the power button on the control panel.
3. Press the mode button on the control panel until the display’s DEHUM light turns on.
You must attach the drainage tube to the upper draining opening when using dehumidify mode.
In dehumidify mode, the fan speed is automatically set to low and cannot be adjusted.
Section 6. Maintenance
Proper maintenance will help improve your RolliCool’s performance. Periodically, the RolliCool
will need its filters cleaned. For optimal performance, the filters should be cleaned at least twice
a month.
• If any type of non-routine maintenance is needed, such as any maintenance not described in Section 6 of this
manual, please contact customer service or a certified HVAC professional as the unit contains refrigerant.
• Wipe the exterior clean with non-abrasive cloth. If needed, cloth can be dampened with water.
• Do not use harsh chemicals to clean as these may damage the unit.
6.1 – How to Clean the Filter
•
Please make sure your AC unit is completely powered off before performing any type of maintenance.
• Do not scrape the air filter.
• A hand vacuum may be used to clean the filter.
• Reinstall the filter after cleaning. Do not use the RolliCool without the filter.
• If water has been used to clean the filter, ensure it is completely dried before reinstalling. Do NOT dry the filter in direct
sunlight or a drying appliance. Allow the filter to air dry.
