5. FUNCTIONING / MANIPULATION
a) Installation / assembly
:
- Unpack carefully the device of its packaging.
- Place it on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible materials
even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Remove the protective film around the device and unpack the fire stone
b) First starting
:
During the first use, warm your machine up outside to evacuate residual smokes of
manufacturing oil from the metallic parts. This may emit a slight smell for a few mo-
ments.
First cleaning
Clean the device before the first use. (See 6. Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged. If necessary, it has to be re-
placed by the manufacturer, its after sale service or any qualified person to avoid any
risk.
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly on
the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Function
Regulator (n°5 on picture)
Temperature setting of the bottom heating element
Thermostat (n°3 on picture)
Temperature setting inside the cooking chamber
Green pilot light
(n°2 on picture)
Machine on (pilot light on)
Machine off (pilot light off)
Orange pilot light
(n°4 on picture)
Warming up (pilot light on)
Desired temperature reached (pilot light off)
15 min timer (n°1 on picture)
On/off + Cooking time
4
15
Содержание PZ 430 D
Страница 8: ...8 11...
