EN-38
Preview
This sets the preview interval when displaying the captured image on the screen imme-
diately after the image is captured.
* 2 sec. / 4 sec. / Off
Date Print
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured.
* On / Off
Beep
This sets whether or not to mute the camera sound each time you press the camera's
buttons.
* On / Off
White Balance
This sets the white balance for a variety of lighting conditions and permits images to
be captured that approach the conditions that are seen by the human eye.
* [ Blank ] Auto
* [ ] Incandescent
* [ ] Fluorescent 1
* [ ] Fluorescent 2
* [ ] Daylight
* [ ] Cloudy
* [ ] Manual
Manual WB
This manually sets the white balance and stores it. Use of this is convenient when the
white balance does not offer a good match.
Before select [Execute] determine the subject (such as a white paper) that will be
used to set the white balance.
* Cancel / Execute
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the
ISO figure is increased), photography will become possible even in dark locations, but
the more pixelated (grainier) the image will appear.
* Auto / 100 / 200 / 400 / 800 / 1600
Metering
This sets the metering method for calculating the exposure.
* [ ] Multi: The entire area of the screen is measured, and the exposure is calculated.
* [ ]
Spot: A very small portion of the center of the screen is measured, and the exposure is calculated.
* [ ] Average:Averages the light metered from the entire frame, but gives greater weight to
the subject matter at the center.
Focus Area
This sets the focusing area.
* Multi: The function of auto focus finds the best proper position from 9 blocks of focus area.
* Center: The function of auto focus adjusts focus at the center of image.
Real Time AF
This sets the real time focus function at image during the preview mode.
* On/Off
Flash Offset
This sets the flash strength. The flash power becomes strong when selecting “+” values.
The flash power becomes soft when selecting “-” values.
* +2 / +1 / 0 / -1 / -2
1
2
