9
Save color, saturation and intensity:
You have the possibility of up to 8 different color profiles
to be saved.
• Select your desired color, saturation and intensity.
• Then turn the control knob (B) and select the Preset Colors
menu by turning the control knob (B). Press the control knob
(B) again to select the Preset Colors menu.
• Turn the control knob (A) to select the different memory loca-
tions.
• To save the set color, saturation and intensity, press the control
knob (A) once.
• To recall the saved presets, press the control knob (B), select the
Preset Colors menu, and select the preset location by turning
the control knob (A). To exit the Preset Colors menu, press the
control knob (B).
You can use the Lumen Pro RGB to recall various preset styles and
color effects.
• Press the control knob (B) and select the menu ”Cycle Effects“
by turning the control knob (B). Press the control knob (B) again
to select the function.
• Now select a color effect or cycle by turning the knob (B).
– Transitions: 37-47, 83
– Stroboscope: 48-55, 84-86
– Pulsating: 56-59, 81-82, 87
– Fire Light: 102
– Party Lights: 103
– Police car: 104
– TV light: 105
– Flash: 106
To increase or decrease the speed of the effect, turn the control
knob (A) until ”Speed“ is highlighted. Turn knob (B) to adjust the
speed – 1 is the slowest speed and 32 is the fastest.
Color, Saturation and Intensity
Color Effects and Styles
DMX Option
Connect the DMX output (7) to the RGB Pro light and turn on the
unit.
The control panel should automatically detect the control and
switch to DMX mode. The display will show ”DMX 512 with RGB“.
The channel information is displayed below the display.
• Channel 1: Centre channel
• Channel 2: Red
• Channel 3: Green
• Channel 4: Blue
The DMX512 is set to channel one by default, but four channels
are supported. Set channel one to any number above zero (we
recommend the 50% position). The panel functions supported in
DMX mode are RGB, Hue/Saturation/Intensity and CCT, Red, Green
and Blue can now be controlled individually.
To change the mode, press the control knob (B) once.
The menu displays the following:
DMX
1/SW 2/R 3/G
1/SW 2/l 3/S4/H
1/SW 2/BRI 3/CCT
The number in front of each letter is the channel number for the
selected function. The first line is the RGB mode and allows the
user to make red, green and blue settings. The second line allows
you to adjust the intensity, saturation and hue of the selected
color.
The third line allows you to switch to CCT mode. To change the
mode, turn the control knob (B) clockwise until the desired mode
is highlighted. Press the control knob (B) and the light changes to
the selected mode and can be controlled with the DMX controller.
7
B
