rollease acmeda Automate FT, Инструкция по эксплуатации

Страница: 8 / 12

© 2015 Rollease Acmeda
Blind can be at any point.
Page. 8 of 12
3.6 FAVORITE POSITION
DOWN
drive blind to
desired position
STOP STOP P2
=
Jog
1
SETTING FAVORITE POSITION
DELETING FAVORITE POSITION
Operation
Item
Item Operation Result Illustration
Setup
bottom
limit
1
Keep pressing the
LIMIT key on the
primary transmitter for
6 seconds above
The motor sounds
"KA
KA"
2 Release the key
The motor is under the
status of Limit setting
3
Press the DOWN key
on the transmitter
The motor runs down
4
When the motor is
running close to the
end-point of lower limit,
press STOP
The motor stops running
5
Press either UP or
DOWN key
The motor runs step by
step to adjust lower limit
accurately
6
Press CONFIRM key
on the transmitter
The motor sounds "KA
KA" , the setting has
complete.
Setup
upper limit
7
Press UP key on
primary transmitter
The motor runs up
8
When the motor is
running close to the
end-point of upper limit,
press
STOP
The motor stops running
9
Press either UP or
DOWN
The motor runs step by
step to adjust lower limit
accurately
10 Press
CONFIRM key
on the transmitter
The motor sounds "KA
KA" , the setting has
complete.
Charging
The motor work with Li-ion battery, please have it charged when the motor stop working or work
faltering. Please plug the charger into the charger hole on the motor head, the charging time is
5 to 6 hours.
FAQ
If nothing works, please check:
●
if the motor does not working or works faltering, please charging the motor battery firstly
●
If the motor runs to a direction continually, the user didn't setup limit successfully, please re-set
limit.
P2 STOP STOP
=
Beep x 3
TO SEND BLIND TO FAVORITE POSITION
Hold STOP
x5 secs