Notice originale : Français NT0002 V –p – 03/2014
26
Installation of the auto-pilot system:
The auto-pilot axle requires the installation of a pilot cylinder. According to your trailer, you
may have to mount one or two clevis mountings in your tractor. These clevis mountings aren´t
warranted by ROLLAND. According to the brand and model of the tractor the positions of
clevis mountings may vary.
For one auto-pilot axle
For two auto-pilot axles
When the tractor is fully blocked, check that there is approximately
20mm margin at the piston rods of rolling i.e. they are not completely
in
or
out
.
Mounting the clevis:
The axle of the ball cylinder must have a minimum distance of :
180 mm for a simple cylinder mounting
120 mm / 160 mm for a double cylinder mounting
The ball cylinder´s axle must be remote:
18 mm of the
boom/jib´s
axle.
18
180
Axle of boom/ jig ring
Clevis fixed on
tractor
