Notice originale : Français NT0002 V –p – 03/2014
37
3.
Cleaning and lubrication:
Proceed with profound cleaning of the spreader after each use. Then continue with a general
lubrication of the body (spray oil) and check the brakes. Check the machine for all cleaning
and lubricating operations (see §1-1 on page 3)
Each 10 hours:
-
Greasing of the rug AV and AR nuts
- Lubrication of the Power Take-Off transmission
Each 50 hours:
- Lubrication of rolling, jib and bearings of the shaft 1-3 times / year (following
utilization)
- Lubrication of the scraper bearings (on the right of TCE, up on the vertical (in the upper
crankcase)). Provide adequate means of access (Cf. p.32)
-Lubrication of the bearings of transmission shaft
The lubrication points are represented by red dots on the diagram below. The oil of different
mechanical housings (gear reducers, gearbox and bevel gears) should be replaced every year
or every 200 hours in accordance with the amounts shown in the "maintenance of mechanical
housings." The recommended oil is SAE 140.
