Safety
SecuriCharge Intelligent EV Charging Unit
EVSM-V01-R1 Installation and Operation Manual
Page
3
of
33
December 2022
Safety
This manual is specifically applicable to the SecuriCharge Intelligent EV Charging Unit and
is provided as a guide to its installation and operation.
IMPORTANT:
Installers and End Users must read and understand the content
of this manual before installation and/or use of the product.
Installation must only be performed by someone who is properly qualified and
competent to do so in accordance with the current legislation applicable in the
geographical region of the installation.
x
Rolec Services Ltd cannot accept any responsibility for improper installation or any
problems arising from improper installation.
NOTE:
Damage to the equipment, connected systems or to property caused by
improper installation are the responsibility of the installer.
x
The information provided in this manual must ONLY be used with the model(s) listed on
page 1 of this manual.
x
The information provided in this manual must NOT be used with any other product.
x
The content of this manual may be updated by the manufacturer as required.
x
Do NOT use the equipment for anything other than its intended purpose.
x
Do NOT modify the equipment unless specifically instructed to do so by the
manufacturer.
x
Do NOT attempt to repair the equipment unless specifically instructed to do so by the
manufacturer.
x
To maintain electrical safety, the body enclosure of the product (access covers) must
be secured in their correct location using the supplied fasteners and the seal must be
sufficient to maintain the IP rating of the enclosure.
x
Fasteners used to mount the product in its working location must be sufficient for the
task and the specific mounting point.
x
Damage to the product may render it unsafe. The product must be electrically
isolated and NOT used until appropriate remedial action has been performed.
Safety Advice within this Manual
Rolec manuals use a system of warnings, cautions and notes.
x
WARNINGS
concern the safety of installers/end user and will be given before the
detail/instructions in the manual.
x
CAUTIONS
concern the potential for damage to the equipment and will be given
before the detail/instructions in the manual.
x
NOTES
are given to provide additional information and/or to highlight information of
importance. They will be given either before or after the detail/instructions as
appropriate and may use different wording (such as IMPORTANT) where emphasis is
required.
Warnings, Cautions and Notes may be repeated several times as appropriate and may
be preceded by a hazard symbol where appropriate.
