background image

5

Playing the XPS-30

Turning On/Off the Power

Before turning the unit on/off, always be sure to turn the volume down. Even with 

the volume turned down, you might hear some sound when switching the unit on/

off. However, this is normal and does not indicate a malfunction.

1. 

Turn the power on in the following order: 

this unit 

0

 connected devices.

 

* This unit is equipped with a protection 

circuit. A brief interval (a few seconds) after 

turning the unit on is required before it will 

operate normally.

A screen like the following appears.

 

* The explanations in this manual include illustrations that depict what should 

typically be shown by the display. Note, however, that your unit may incorporate 

a newer, enhanced version of the system (e.g., includes newer sounds), so 

what you actually see in the display may not always match what appears in the 

manual.

2. 

Turn the [MASTER VOLUME] knob to adjust the volume.

Turning the Power Off

1. 

Turn the power off in the following order: connected devices 

0

 this unit.

Playing a Single Tone (Patch Mode)

1. 

Make sure that the [PATCH/PERFORM] 

button is unlit.

If the [PATCH/PERFORM] button is lit, press the 

[PATCH/PERFORM] button to make it go dark.

The XPS-30 is in Patch mode, and the PATCH 

screen appears.

 

 

 

 

 

 

 

 

 

10 

 

11 

 

No.

Explanation

 

Effect on (lit)/off (unlit)

 

Tempo

 

Patch bank

 

Bank number

 

Sub category

 

Category number

No.

Explanation

 

Patch name

 

Octave Shift setting

 

Patch level

10 

 

Level meter

11 

 

Parameters that can currently be 

adjusted by the control knobs

2. 

Press a category button ([A. PIANO/E. PIANO]–[SAMPLE]) to select a 

category.

Category

Explanation

A. PIANO/E. PIANO

Piano

ORGAN/KEYBOARD

Organ, Keyboard

STRINGS

Strings

BRASS

Brass, Woodwinds

GUITAR/BASS

Guitar, Bass

SYNTH

Synthesizer

PAD/FX

Pads, Sound effects

WORLD/OTHER

Ethnic instruments, other

DRUMS

Drum kit

SAMPLE

Sample (imported audio files)

Patches are organized into categories which are assigned to buttons.

Each category is further divided into several sub-categories.

3. 

Use the value dial to select a patch.

MEMO

Patches whose category number is marked with an “S” (e.g., Pf: S01) are specially 

recommended sounds.

Selecting a bank

1. 

Move the cursor to bank, and use the value dial to select a bank.

Bank

Explanation

PRST (Preset)

These patches cannot be rewritten. The edited result is saved in 

the user bank.

GM (GM2)

This bank is for GM2 sounds. These sounds cannot be edited.

EXP

This bank is for expansion sounds.

A wide range of tones from the Axial sound 

library site can be added to this unit.

For details, refer to the Axial site.

http://axial.roland.com/

USER

Patches, drum kits, or samples that you edit are saved in this 

bank.

 

5

User patches can be saved in numbers 501–756.

 

5

User drum kits can be saved in numbers R501–R508.

Performing Multiple Sounds Together (Performance Mode)

1. 

Press the [PATCH/PERFORM] button to 

make it light.

The XPS-30 is in Performance mode, and the 

PERFORM screen appears.

16-part mode

Dual

Split

Super Layer

Performance bank/number

2. 

Move the cursor to bank, and use the value dial to select a bank.

Bank

Explanation

PRST (Preset)

These performances cannot be rewritten. The edited result is saved in the user 

bank.

USER

Performances that you edit are saved in this bank.

User performances can be saved in numbers 001–128.

3. 

Move the cursor to performance number, and use the value dial to select a 

performance.

 

5

If you select a performance that is set to split, dual, or super layer, the 

corresponding button is lit.

 

5

Within Performance mode, the state in which neither split, dual, nor super layer 

is selected is called “16-part mode”; this allows you to make more detailed 

settings. For details, refer to “Parameter Guide (English)” (PDF).

When you edit the settings of a patch or performance, an “*” symbol appears 

beside the name. If you want to keep the edited settings, perform the Write 

operation (p. 10).

When you save the setting, the “*” disappears.

On

Off

Содержание XPS-30

























Отзывы: