Roland VR-4HD, Справочное руководство

Страница: 8 / 38

Menu List (Setup Screen)
8
Audio Channel 1–4 Settings
(Audio Channel 1–4 [SETUP] buttons)
Setting item Value Explanation
SOLO OFF , ON (blue)
This sets the Solo feature on or off. Only the input audio for the channel which has solo “ON” can be monitored
via headphones.
MUTE OFF , ON (red) This sets the Mute feature on or off. Input audio for which this is set to “ON” is silenced.
HA GAIN 0 –64 dB This adjusts head amp gain.
GAIN -42.0– 0.0 –42.0 dB This adjusts digital gain.
LEVEL
-Inf–10.0 dB This adjusts the volume level of input audio.
AUX SEND -Inf– 0.0 –10.0 dB This adjusts the send level of audio to the AUX bus.
REV SEND -Inf –10.0 dB This adjusts the send level of audio to Reverb.
EQ HI
-15–
0
–15 dB This boosts or attenuates the high band.
FREQ 1.00–
10.0
–20.0 KHz This adjusts the center frequency when changing the sound quality in the high band.
EQ MID -15– 0 –15 dB This boosts or attenuates the middle band.
FREQ 20.0 Hz– 500 Hz –20.0 KHz This adjusts the center frequency when changing the sound quality in the middle band.
Q 0.5– 1.0 –16.0 This adjusts the width of the frequency band when boosting or attenuating the middle band.
EQ LO
-15–
0
–15 dB This boosts or attenuates the low band.
FREQ 20.0– 100 –500 Hz This adjusts the center frequency when changing the sound quality in the low band.
GATE OFF , ON This sets gate on or off.
THRESHOLD -80– -50 –0 dB This sets the level used as the threshold for removing audio. Audio below the level set here is removed.
RELEASE
30–
860
–5000 ms This adjusts the length of time until the audio is fully attenuated after audio falls below the threshold.
COMP
OFF
, ON This sets the compressor on or off.
THRESHOLD -60– -30 –0 dB
This sets the level used as the threshold at which the compressor is applied. Compression is applied to audio
that exceeds the level set here.
RATIO
1.00: 1, 1.12: 1, 1.25: 1, 1.40: 1, 1.60: 1,
1.80: 1, 2.00: 1, 2.50: 1, 3.20: 1, 4.00: 1,
5.60: 1 , 8.00: 1, 16.0: 1, INF: 1
This specifies the degree of compression applied to the audio. The state in which no compression is applied is
defined as “1.”
ATTACK
0.2–
1
–100 ms This sets the time until compression starts when audio exceeding the threshold is input.
RELEASE
30–
380
–5000 ms This adjusts the length of time until compression ends after audio falls below the threshold.
AUTO GAIN OFF,
ON
This switches the auto makeup gain feature on or off.
When this is set to “ON,” the final output volume level after applying the compressor is automatically adjusted
according to the “THRESHOLD” and “RATIO” settings. The total of the “MAKEUP GAIN” setting value described
below and the value calculated by auto makeup gain becomes the final output volume level (up to +34 dB).
MAKEUP GAIN -40– 0 –40 dB This adjusts the final output volume level after applying the compressor.
HPF OFF , ON This sets the high-pass filter on or off.
PAN LEFT–
CENTER
–RIGHT This adjusts the sound position (pan).
DELAY 0.0 –500.0 ms This adjusts the delay time for audio.