Roland VR-4HD, Справочное руководство

Страница: 13 / 38

Menu List (Setup Screen)
13
USB Input/Output Audio Settings
(USB [SETUP] button g < > < > )
USB FROM PC
Setting item Value Explanation
SOLO
OFF , ON (blue)
This sets the Solo feature on or off. Only the input audio for the channel which has solo “ON” can be
monitored via headphones.
MUTE
OFF , ON (red)
This sets the Mute feature on or off. USB input audio for which this is set to “ON” is silenced.
GAIN
-42.0–
0.0
–42.0 dB
This adjusts digital gain.
LEVEL
-Inf–10.0 dB
This adjusts the volume level of USB input audio.
AUX SEND
-Inf–
0.0
–10.0 dB
This adjusts the send level of audio to the AUX bus.
REV SEND
-Inf
–10.0 dB
This adjusts the send level of audio to Reverb.
EQ HI
-15–
0
–15 dB
This boosts or attenuates the high band.
FREQ
1.00–
10.0
–20.0 KHz
This adjusts the center frequency when changing the sound quality in the high band.
EQ MID
-15–
0
–15 dB
This boosts or attenuates the middle band.
FREQ
20.0 Hz–
500 Hz
–20.0 KHz
This adjusts the center frequency when changing the sound quality in the middle band.
Q
0.5–
1.0
–16.0
This adjusts the width of the frequency band when boosting or attenuating the middle band.
EQ LO
-15–
0
–15 dB
This boosts or attenuates the low band.
FREQ
20.0–
100
–500 Hz
This adjusts the center frequency when changing the sound quality in the low band.
DELAY
0.0
–500.0 ms
This adjusts the delay time for audio.
CONNECTION
—
If a USB connection with the computer fails to be established or video is corrupt, select < RESET> to
reconnect via USB.
STATUS
—
This indicates a connection using either USB 2.0 or USB 3.0. When no connection to a computer has been
made, the message “NC” is displayed.
DROPPED — This is normally “0.” An increase in this value means that video transmission is not fast enough.
USB TO PC
Setting item Value Explanation
MUTE OFF , ON (red)
This sets the Mute feature on or off. USB output audio for which this is set to “ON” is silenced.
LEVEL -Inf–10.0 dB
This adjusts the volume level of USB output audio.
DELAY 0.0 –500.0 ms
This adjusts the delay time for audio.
CONNECTION —
If a USB connection with the computer fails to be established or video is corrupt, select < RESET> to
reconnect via USB.
STATUS —
This indicates a connection using either USB 2.0 or USB 3.0. When no connection to a computer has been
made, the message “NC” is displayed.
DROPPED —
This is normally “0.” An increase in this value means that video transmission is not fast enough.