Roland VersaStudio BR-20, Руководство пользователя

Страница: 106 / 112

Main Specifications
104
Chapter 4 Appendix Chapter 4 Appendix
(*1)
It must be within the ranges shown below:

150 to 170 mm (5.9 to 6.7 inch)

200 to 235 mm (7.9 to 9.3 inch)

287 to 322 mm (11.3 to 12.7 inch)

348 to 383 mm (13.7 to 15.1 inch)

393 to 429 mm (15.5 to 16.9 inch)

439 to 474 mm (17.3 to 18.7 inch)

487 to 515 mm (19.2 to 20.3 inch)
(*2)
The length of printing or cutting is subject to the limitations of the program.
(*3)

Media type: Media specified by Roland DG Corp.

Temperature: 25°C (77°F), humidity: 50%

Roll media must be loaded correctly.

Front margin: 35 mm or more

Excluding expansion/contraction of the media

All correction or adjustment function of this machine has been made properly.
(*4)
With Roland PET film, print travel: 1 m
(*5)
Range for assured repetition accuracy: Length 1,000 mm
(*6)
Range for assured repetition accuracy : Length 1,000 mm
(*7)

Provided that media length is under 1,000 mm

Excludes the effects of slanted movement and of expansion and contraction of the media.
(*8)

Data size : 1,000 mm in the media-feed direction, 480 mm in the carriage-movement direction

No lamination

Automatic detection of crop marks at 4 points when media is reloaded.

Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
(*9)
Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.

Depending on the ambient temperature and media width, the temperature may fail to be reached 35 (°F).
(*10)
Operating environment
Use in an operating environment
with this range.