5. AQUEOUS PIGMENT ink (FPG2): Installing the Ink Cartridges
32
Hold down
and
, switch on the main power switch.
When a message appears on the display screen, release the operation-panel buttons.
When this screen appears, press
.
The sub power is switched off and the display screen goes blank.
This completes selection of the ink mode that enables use of AQUEOUS PIGMENT ink.
(FPG2)
2.
Switch on the sub power again, and make the initial settings.
Hold down
and press the sub power
switch.
Use
to select the language you want.
Press
.
Use
to select the unit of measurement you want
(for length).
Press
.
Use
to select the unit of measurement you want
(for temperature).
Press
.
Press simultaneously.
Hold down until the
message appears.
