Advanced Per
for
mance
34
1
2
5
3
4
1
2
3
4
5
The
V-Synth
’s Matrix Control is used for routing any sources of MIDI data to a wide
range of possible destinations. Available sources include the
V-Synth
’s left-hand
controls, all standard MIDI continuous controllers (including Pitchbend and Modulation)
as well as Aftertouch, Velocity and Key Follow.
Let’s add a bit more depth to the “Simplicity” patch you made early on in this tutorial - it
should be number
300
. Touch
Common
, select the
Matrix Ctrl
tab and
the
Control 1/2
tab if necessary
. Pushing the Bender (CC01) has already been used for
adding vibrato, but here is a little trick which can always be used to make this more
expressive: Touch the
Control 1
/
Destination 2 List
pad and
select
018:OSC1-
LFO-RATE
. Touch
OK
and set the sensitivity (Sens) to
+2
. Pushing the Bender now
increases the vibrato rate as well as its depth.
5
4
3
2
1
Highlight the source of
Control 2
(at the moment this reads
+PAD-Y
) and change it to
AFT
(aftertouch) by pressing the
DEC/-
button twice
.
Select
044:CSM1-PRM1
(COSM1-Parameter1) from the upper list
and change the
corresponding sensitivity to
+20
. Pressing harder on the keyboard now opens the
filter a little.
3
2
1
To make filter
Cutoff
velocity sensitive, you don’t really need to use the Matrix: Simply
go to
COSM1
/
Cutoff
page
and change the
Velocity Curve
to
1
.
5
4
The Matrix - Assigning Destinations
