First Steps
11
Although this sound is still very primitive, it’s about time we named and saved it to make
sure that all the work done so far is not lost. Open the drop-down menu (via the triangle)
and select
PATCH Write
.
1
Now touch the
Rename
pad
. Enter a suitable name: “
Simplicity
”.
At this point you might like to try out all the pads in this page, for instance
Shift
gives
you capitals instead of lower case letters and symbols instead of numbers. Confirm with
the
OK
pad in the bottom right-hand corner of the screen
. To save the sound to an
unused location (300), change the
Destination
using the
VALUE
dial
. When you
are sure the destination number is correct and that you are not overwriting any patch
you might need in future, touch the
Execute
pad
. Note that you can
Compare
a sound to the original before overwriting.
6
5
4
3
2
We’ll be improving “Simplicity” later on, so please make sure you have saved it.
Now it’s time to learn a little more about each individual section in your
V-Synth
...
2
4
5
6
1
3
