manualshive.com logo in svg

Roland V-Card VC-1, Руководство пользователя

Поделиться
Скачать
Roland V-Card VC-1 Скачать руководство пользователя страница 90

 

90

 

Panel Description

 

When using the VariOS with the 

 

VC-1

 

, the actual functions of the VariOS’s buttons and knobs may not 

correspond to the functions ascribed to these controls on the VariOS’s panel. Here is a description of the 
names and functions in each section of the VariOS when it is used with the VC-1. Please read this material 
together with “Names of Things and What They Do” in the VariOS User Guide. Controls whose functions 

do not match what is shown on the panel are indicated with a 

 mark.

 

fig.12-01(VariosFront)

 

PC CARD Slot

 

The 

 

VC-1

 

 can be inserted here.

 

C1/C2/C3 Knobs

Indicators

Display

 

Various information is shown here according to the operations you perform.

 

*

The explanations in this manual include illustrations that depict what should typically be shown by the display. 
Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer 
sounds), so what you actually see in the display may not always match what appears in the manual.

 

Front Panel

 

Display

Functions

 

C1

 

 (PITCH)

The 

 

volume balance

 

 of the Upper and the Lower Tone can be change.

 

C2

 

 (TIME)

This sets the volume of the 

 

reverb

 

 and direct sounds.

 

C3

 

 (FORMANT)

This sets the 

 

portamento time

 

 from one note to another. If Portamento Switch (p. 99) is set to 

 

OFF

 

, 

 

C3

 

 knob may have no effect.

 

Display

Functions

 

MIDI

 

Lights when a MIDI message is received.

 

TEMPO

 

This does NOT function for VC-1.

 

PC

 

Lights when the MIDI mode of the VariOS is “PC” (p. 119).

 

USB

 

Lights when connected to a computer via USB.

1

2

3

4

5

6

8

9

10

11

7

1

2

3

4

vc1_e.book 90 ページ ２００４年４月２日　金曜日　午後３時２１分

Содержание V-Card VC-1





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды