Roland V-Card VC-1, Руководство пользователя

Страница: 115 / 156

115
Creating Patches
Initialize means to return the settings of the currently selected patch to a standard set of values. The
Initialize operation will affect only the currently selected patch in temporary area; the patches that are
stored in internal memory and work area will not be affected. If you wish to restore all of the VC-1’s
settings to their factory values, perform a
Factory Reset (p. 115).
fig.12-24
1.
Press the [MENU] button so it’s lighted, and access the MENU
screen.
2.
Turn the [VALUE] knob to select “ Utility ,” and press the [VALUE]
knob.
fig.12-36
3.
Turn the [VALUE] knob to select “ Patch Initialize ,” and press the
[VALUE] knob.
fig.12-37
4.
The display will ask “OK?” Press [VALUE] knob once again to
carry out the Patch initialize operation.
This restores all data in the VC-1 to the factory-set condition (Factory Reset).
If there is important data you’ve created that’s stored in the VC-1, all such data is discarded when a
Factory Reset is performed. If you want to keep the existing data, save it as describe below.
• Transmit it to an original D-50 (or an external MIDI device) and save it (p. 104).
fig.12-24
1.
Press the [MENU] button so it’s lighted, and access the MENU
screen.
2.
Turn the [VALUE] knob to select “ Utility ,” and press the [VALUE]
knob.
fig.12-38
3.
Turn the [VALUE] knob to select “ Factory Reset ,” and press the
[VALUE] knob.
fig.12-38a
4.
Press [VALUE] knob once again to carry out the factory reset
operation. When the operation is completed, the display will
indicate “
Completed! ”
Initializing Patch Settings
Reset to Default Factory Settings
vc1_e.book 115 ページ ２００４年４月２日 金曜日 午後３時２１分