manualshive.com logo in svg

Roland V-Card VC-1, Руководство пользователя

Поделиться
Скачать
Roland V-Card VC-1 Скачать руководство пользователя страница 114

 

114

 

Creating Patches

 

Changes you make to sound settings are temporary, and will be lost if you turn off the power or select 
another sound. If you keep the modified sound, you must save it in the VC-1 (PATCH WRITE).

When you perform the save procedure, the data that previously occupied the save destination will be lost. 
However, the factory setting data can be recovered by performing the Factory Reset. (

 

“Reset to Default 

Factory Settings”

 

 (p. 115))

 

*

Never insert or remove the VC-1 while the VariOS is turned on. Patches cannot be saved to PC cards other than the 
VC-1.

 

1.

 

Make sure that the patch that you want to save is selected.

 

fig.12-33

 

2.

 

Press the 

 

[MENU]

 

 button so it’s lighted, and access the 

 

MENU

 

 

screen.

 

3.

 

Turn the 

 

[VALUE]

 

 knob to select “

 

Patch Write

 

,” and press the 

 

[VALUE]

 

 knob.

 

fig.12-35e

 

4.

 

Turn the 

 

[VALUE]

 

 knob to specify the save-destination patch.

 

fig.12-35a

 

5.

 

Press the 

 

[VALUE]

 

 knob, and the display will ask “Are You Sure?” 

Press 

 

[VALUE]

 

 knob once again to carry out the patch save 

operation.

 

Saving Patches

Cursor

vc1_e.book 114 ページ ２００４年４月２日　金曜日　午後３時２１分

Содержание V-Card VC-1





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды