manualshive.com logo in svg

Roland V-Card VC-1, Руководство пользователя

Поделиться
Скачать
Roland V-Card VC-1 Скачать руководство пользователя страница 55

 

55

 

Creating a Patch

 

PARTIAL (Source Partial)

 

If PART-1 or PART-2 is selected in 

, select the corresponding block.

 

Value:

 

 PART-1, PART-2

 

*

When 

 is set to 

 

All

 

 or 

 

COMMON

 

, 

 setting is ignored.

 

6.

 

Touch 

 

<Execute>

 

 to execute the copy operation. If you want to cancel without executing, touch 

 

<CANCEL>

 

.

While editing a parameter, you may wish to hear the original sound before it was edited. The 

 

Compare

 

 

function allows you to call the original Patch without erasing the edited sound.

 

1.

 

In the upper right of the screen, touch 

 

<

>

 

. A pulldown menu appears.

 

2.

 

In the pulldown menu, touch 

 

<CONPARE>

 

. The 

 

PATCH COMPARE

 

 window appears.

 

fig.08-14

 

3.

 

Touch 

 

<COMPARE>

 

 to turn it on, and the original sound may be heard by playing the keyboard.

 

4.

 

Touch 

 

<COMPARE>

 

 again to turn it off, and the edited sound will come back.

 

5.

 

Touch 

 

<OK>

 

 to return to the 

 

PATCH TOP

 

 screen.

 

Auditioning the Sound Before Editing

vc1_e.book 55 ページ ２００４年４月２日　金曜日　午後３時２１分

Содержание V-Card VC-1





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды