Roland V-Accordion FR-7X Скачать руководство пользователя

Страница: 87 / 140

10.3 Pedal Controller (Advanced)

V-Accordion

This page allows you to assign
functions to the FBC-7’s foot-
switches. As you will notice
below, there are also functions
for remotely controlling exter-
nal instruments, like an arranger module or any other
device that understands the messages transmitted by
the FBC-7.

Note:

The assignments you program here are only meaningful

if you connect the FR-7x to the supplied FBC-7.

(1) Press the

[DATA÷ENTER]

knob to select the

“SWITCH” parameter, then rotate the

[DATA÷ENTER]

knob to select the footswitch on the FBC-7 whose
function you wish to define.

(2) Press the

[DATA÷ENTER]

knob to select the

“ASSIGN” parameter, then rotate the

[DATA÷ENTER]

knob to select one of the following functions:

Parameter

Explanation

Set Up/
Set Down

The footswitch allows you to select the
next (Down) or previous (Up) Set memory.
After selecting Set 01 (or 80), pressing the
footswitch again takes you to Set 80 (or
01).
These are the default functions of foot-
switches [1] and [2].

Regist Up/
Regist Down

The selected footswitch allows you to
select the next (Down) or previous (Up)
treble register. If you combine this with
the “2.12 Bass Link” and “2.13 Orchestra
Link” parameters, this allows you to recon-
figure almost all sections simply by press-
ing this footswitch.

Sust.A*

The footswitch can be used to hold the
note messages the selected section
(page 88) transmits via MIDI. You can then
release the keys or buttons – the notes go
on sounding until you release the foot-
switch.

Sust.B*

Orch.On/Off

The footswitch allows you to switch the
ORCHESTRA section on and off.

Start/Stop*

Pressing the footswitch once will cause
the external device to start playback. Press
the footswitch again to stop playback.

Intro*

The footswitch can be used to select the
“Intro” pattern of the active Music Style.

Note:

Arranger instruments of other manu-

facturers may not understand this message.
If in doubt, see their MIDI implementation
section for details. The MIDI message trans-
mitted by this footswitch is PC83 (program
change) on MIDI channel 10.

Fill Up*

The footswitch can be used to select a fill-
in pattern of the active Music Style. If the
instrument being controlled provides sev-
eral fill-in patterns, you can select them
one after the other in ascending order.

Note:

You cannot cycle back to the lowest

level (which is called “Original” on older
Roland arranger instruments).

Note:

The MIDI message transmitted by this

footswitch is PC81 (program change) on
MIDI channel 10.

Fill Down*

Note:

You cannot cycle back to the highest

level (which is called “Variation” on older
Roland arranger instruments).

Note:

The MIDI message transmitted by this

footswitch is PC82 (program change) on
MIDI channel 10.

Ending*

The footswitch can be used to select the
“Ending” pattern of the active Music Style.

Note:

The MIDI message transmitted by this

footswitch is PC84 (program change) on
MIDI channel 10.

PitchUp 1/2
PitchUp 1

The selected footswitch allows you to
bend the notes you are playing a semi-
tone (“1/2”) or two semi-tones (“1”) up.
When you release the footswitch, the
pitch returns to its regular level.

PitchDwn 1/2
PitchDwn 1

The selected footswitch allows you to
bend the notes you are playing a semi-
tone (“1/2”) or two semi-tones (“1”) down.
When you release the footswitch, the
pitch returns to its regular level.

Rtry Sw**

The footswitch allows you to switch the
Rotary effect (see p. 55) on and off.

Rtry
SlowFast**

The footswitch allows you to alternate
between the slow and fast rotation
speeds.

Note:

The function is only meaningful if the

Rotary effect is currently on.

Rtry Slow**

The footswitch allows you to select the
slow rotation speed.

Note:

The function is only meaningful if the

Rotary effect is currently on.