Roland V-Accordion FR-7X, Руководство пользователя

Страница: 77 / 140

5.6 Panpot (Advanced)
V-Accordion
r
77
5.6 Panpot
(Bass 63~0 Treb 0~63 Bass)
Depending on the selected
sound, this parameter allows
you to change the ORCHES-
TRA BASS part’s placement in
the stereo sound field (i.e. between the left and right
speakers) to create a livelier sound image. The “Treb” val-
ues mean that the sound will appear on the same side as
the treble accordion sound. This setting applies to both
the FR-7x’s internal speakers and the L/MONO socket.
The “Bass” values mean that the sound will appear on
the same side as the bass accordion sound (which is not
available while an ORCHESTRA BASS sound is being
used). This setting applies to both the FR-7x’s internal
speakers and the R/MONO socket.
Choose “0” if the ORCHESTRA BASS sound should be at
the center of the stereo image.
Note: If a TW organ sound is assigned to the current ORCHES-
TRA BASS register, the “VALUE” parameter will read “Rotary” to
signal that the “VALUE” parameter cannot be set.
5.7 Bass Drum
This parameter allows you to
assign up to three drum/per-
cussion sounds to the bass
buttons and to set their levels.
If you assign three sounds, all
three will be played simultaneously whenever you press
a bass button. See page 72 for the procedure.
5.8 Reverb Send, 5.9 Chorus Send,
5.10 Delay Send
(0~127 for all three)
Use these parameters to set
the Reverb, Chorus or Delay
send level (how much effect
should be applied to the
ORCHESTRA BASS section).
The higher the value you set,
the stronger the ORCHESTRA
BASS section will be processed
by the effect in question.
The other sections (treble,
bass, etc.) have the same
parameters, so that you can
create a sound image with various “levels” (foreground,
background). Do note, however, that reverb or delay
effects are hardly ever used for bass sounds.
The effects themselves can be edited on separate pages
(see p. 82).
Note: If a TW organ sound is assigned to the current ORCHES-
TRA BASS register, the “LEVEL” value will read “Rotary” to sig-
nal that the register is not processed by the FR-7x’s “general
effects” (see p. 55). In this case, the “LEVEL” parameter cannot
be set.
5.11 MIDI TX
This page contains a series of
MIDI parameters for the
ORCHESTRA BASS part you
need to set one by one.
See page 113 for details about
the MIDI parameters. These parameters are saved along
with all other Set parameters, which allows you to use
different MIDI settings for each Set.
FR-7x GB.book Page 77 Tuesday, August 25, 2009 10:58 AM