manualshive.com logo in svg

Roland V-40HD, Руководство пользователя, Страница: 55 / 60

Поделиться
Скачать
Roland V-40HD Скачать руководство пользователя страница 55

55

Appendices

No audio is output via equipment connected to OUTPUT 1/2.

Has the correct source been selected using “HDMI Output Select” on the Audio menu?
Is “Main Volume” set too low?
Is the volume level of the connected monitor set too low?
Is the connected audio device is compatible with linear PCM?

The volume level of equipment connected to AUDIO INPUT is too low.

Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.

Video and audio timing is out of sync.

Adjust [HDMI Audio Delay] and [Audio In Delay] on the Audio menu.

A USB memory device cannot be used.

Was the USB memory device formatted on the V-40HD?
A USB memory device that has not been formatted on this product cannot be used. Also, operation has been tested for commonly 
available USB memory devices, but operation of all USB memory devices is not assured. Depending on the manufacturer and type 
of the USB memory device, correct operation may not be possible.

Switching is not complete even when the video fader is moved.

Carry out calibration of the video fader. Move video fader all the way to either the front or the back, then go to the System menu 
and select and execute [Video Fader Calibrate].

The panel indicators are too bright/dark.

Carry out dimmer adjustment. At the System menu, raise or lower the value of the [LED Dimmer] setting.

No labels are displayed on the preview monitor.

Has the setting for hiding labels been made?
Go to the System menu and select [PVW Label] to access the detailed setup screen, and change the setting for [Indicate] to [ON].

Nothing can be saved to MEMORY buttons.

Is memory protection turned on?
Go to the System menu and select [Memory Protect], and set it to [OFF].

No fade is applied to final output.

Is fade time set to zero?
Go to the System menu and select [Output Fade] to access the detailed setup screen, and make the setting for [Time]. No fade is 
applied when this parameter is set to [0.0s].

A short black images appear while switching.

On the conditions below, a short black image is inserted between 2 video images if you directly switch the video pressing the 
buttons in [A-BUS/PGM] section. 

• 

When a direct switching operation is carried out while a logo/text is composited using the DSK function.

• 

[DSK] is selected as the dislay mode of preview monitor and [PST] is selected as the output source for OUTPUT 1/2.

• 

[DSK Source] is selected as the output source for OUTPUT 1/2.

A short black image is inserted the output if you carry out the operations below while you are compositing logo/text using the DSK.

• 

Switching of source channel for background or inset screen while you are using PinP and DSK.

• 

Switching of source channel while the transition effect is going on under the logo/text composited using the DSK.

Содержание V-40HD





























































Отзывы:

Нет отзывов