Roland V-40HD Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 60

Roland V-40HD Скачать руководство пользователя страница 54

54

Appendices

Troubleshooting

Nothing is displayed on the preview monitor.

Does the connected monitor support a resolution and refresh rate of 1920 x 1080/60 Hz (progressive)?
Nothing is displayed if the monitor is not compatible. Also, nothing is displayed if the monitor does not support HDCP signals. If
you are making the connection using an HDMI-DVI conversion cable, go to the Output menu and select DVI-D in PVW Output.

Composite input is not output.

Is composite assigned as the source?
In the factory-default state, HDMI input is assigned. The assignment must be changed to composite input (p. 20).
Does the unit’s frame rate match with it of input signal?
If not, the signal does not come out.

Analog RGB input is not output.

Is RGB assigned as the source?
In the factory-default state, HDMI input is assigned. The assignment must be changed to analog RGB input (p. 19).

* The same operation is also necessary when using a conversion cable to make an analog-component connection.

Is the refresh rate 60 Hz or less?
If the refresh rate exceeds 60 Hz, the unit does not recognize the input signal.

HDMI input is not output.

Is HDMI assigned as the source?
If this is not assigned correctly, the signal cannot be detected.
Is the HDCP applied to the input signal?
If you are attempting to input the signal with HDCP, turn the HDCP setting on.

Output colors are not correct.

Has the setting for color space been made correctly?
At the Input menu, set the channels correctly.
At the Output menu, set the color space correctly.

No output is made via the RGB/COMPONENT connectors of OUTPUT 1/2.

Has the setting for inputting HDCP signals been made?
When [HDCP] on the System menu is set to [ON], output via the RGB/COMPONENT connectors is stopped.

* Note, however, that HDMI output continues.

Is an interlace format selected as the output format?
If you are attemting to output from the RGB/COMPONENT connectors, select a progressive or RGB format.

No output is made via the COMPOSITE connector of OUTPUT 1.

Has the setting for inputting HDCP signals been made?
When [HDCP] on the System menu is set to [ON], as with output via the RGB/COMPONENT connectors, output via the COMPOSITE
connector of OUTPUT 1 is stopped.

Compositing with DSK is not possible.

Is the logo or text being input to the channel specified by [Source Channel] on the DSK menu?
Also adjust [TYPE] and [Level] on the DSK menu to appropriate values matched to the source.

Fading of DSK foreground image is not possible

Is CUT selected as the transition effect?
Is [Chroma 1] or [Chroma 2] is selected as [Type] of DSK?
If you are selecting one of above, the fade in/out of foreground image is disabled. Cut in/out is applied.

«
...
52
53
54
55
56
...
»

Содержание V-40HD





























































Отзывы:

Нет отзывов