Roland V-40HD Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 60

Roland V-40HD Скачать руководство пользователя страница 16

16

Part Names and Functions

Rear Panel

fig.rear-panel.eps

1

2

3

4

5

6 7

8

9

10

1. TALLY Connectors

Connect devices provided with a tally-light feature (p. 23).

2. INPUT Connectors 1 - 4

Connect video sources. Sections 1 through 4 are each provided with the connection terminals described below, and use the
buttons or menu to select the connector to enable.

* By default, HDMI input is enabled for each channel.

COMPOSITE

Connect equipment capable of composite output, such as a video camera or DVD player.

RGB/COMPONENT

Connect a computer or other source equipment capable of analog RGB output. By using a conversion cable for component to
mini D-Sub 15-pin type, you can also connect equipment capable of Y/Pb/Pr component output.

HDMI

Connect a video camera or other source equipment capable of HDMI output. When connecting a Blu-ray Disc player or other
device that outputs signals to which HDCP is applied, refer to “Inputting HDCP Signals” (p. 26).

3. DC IN Connector

This is for connecting the included AC adapter (p. 12).

4. RS-232C Connector

Use this when using an external device to operate the unit by remote control. Refer to “About Remote Control” (p. 53).

5. MIDI Connectors

Use these when remotely controlling the unit from an external MIDI device (a device compatible with MIDI VISUAL CONTROL or the
like), or when using the unit to perform remote control of another device. Refer to “About Remote Control” (p. 53).

6. AUDIO INPUT Connectors

The V-40HD can output video and audio together from the HDMI connectors. Use these AUDIO INPUT connectors to connect
source equipment for analog audio.

7. USB MEMORY Connector

This is for connecting a USB memory device for copying data saved in internal memory.

* Never eject or insert a USB memory device while the V-40HD is powered up. Doing so might cause loss of data in the V-40HD or on the USB

memory device.

* Be careful to orient the USB memory device correctly front and back and in the correct direction for insertion, and insert it firmly, as far as it will

go. Never insert using undue force.

8. OUTPUT 2 Connectors

Connect a projector or recording equipment. RGB/COMPONENT and HDMI output connectors are provided.

9. PVW OUT Connector

Connect a monitor for preview output (p. 10).

10. OUTPUT 1 Connectors

Connect a projector or recording equipment. In addition to the RGB/COMPONENT and HDMI output connectors, a COMPOSITE
output connector is provided.

«
...
14
15
16
17
18
...
»

Содержание V-40HD





























































Отзывы:

Нет отзывов