Roland V-40HD Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 60

Roland V-40HD Скачать руководство пользователя страница 50

50

Menu Operations and Menu List

System menu

The settings for items shown in gray in the table are not saved to MEMORY buttons (1-1 through 5-5). You cannot save multiple settings for these
items using the MEMORY buttons. Only one setting per item can be saved to the V-40HD’s internal memory. Such settings are saved when you exit
the menu. So don’t turn off the power while the menu is displayed.

HDCP

[OFF], ON

This turns the HDCP mode on/off. A confirmation screen appears when [ON] is selected.

Frame Rate

[59.94Hz], 50Hz

This selects the system frame rate.

Panel Mode

A/B, [PGM-PST]

This selects the operation mode. For PGM-PST and A/B, see p. 28 and p . 31.

Source Assign
Mode

OFF, [PGM Select],
PST Select

This changes the operation mode of the input assign buttons (p. 19).

NTSC Setup Level

[0IRE], 7.5IRE

This selects the NTSC IRE level.
* An IRE is a unit used in the measurement of composite video signals and in particular this controls

black level setup. Typically 7.5 is used in US broadcasts while 0 is used in Japan.

AUTO OFF

OFF, [ON]

When AUTO OFF is set to ON, the power is turned off after 240 minutes.

Memory Switch
Fade

OFF, [ON]

When ON, this will automatically engage an output fade between memory selections.

Memory Protect

[OFF], ON

When ON, this disables the ability to save to MEMORY buttons.

MIDI

Pressing [ENTER] changes to a detailed setup screen for MIDI.

Output Fade

Pressing [ENTER] changes to a detailed setup screen for output fade.

PVW Label

Pressing [ENTER] changes to an editing screen for PVW labels.

USB Memory

This makes settings related to USB memory devices.
Parameter

Pressing [ENTER] lets you set parameters related to saving to/loading from a USB memory device.

Format

Pressing [ENTER] changes to a formatting screen for the USB memory device.

LED Dimmer

0 - [7]

This adjusts the brightness level of the top panel LEDs.

Video Fader
Calibrate

Pressing [ENTER] changes to a calibration screen for the video fader.

Menu Background 0 - [4] - 7

This sets the transparency of the menu background.

Menu Position

[Left], Right

This changes the position of the menu display. You can also change this by holding down the [MENU]
button and pressing the left or right [CURSOR] button.

Test Pattern

[OFF],
Color Bar 75%,
Color Bar 100%,
Ramp, Step, Hatch

This turn off or turns on a selected test pattern.

Factory Reset

This returns the V-40HD to its factory-default settings. Pressing [ENTER] displays a confirmation screen.

Detailed setup for MIDI

Status

OFF, [Native], V-LINK Master, V-LINK Slave, MVC Slave

This selects the MIDI remote-control mode of the V-40HD.

Through Output

[OFF], ON

This selects the operation of the MIDI OUT/THRU connector.

Channel

[1] - 16

This selects the MIDI channel to use when Native is selected.

Detailed setup for output fade

Time

0.0s - [0.5s] - 10.0s

This sets the duration of the fade.

Audio Follow

OFF, [ON]

This selects whether audio volume is interlinked with output fade.

Color Setting

Use the following items to make settings related to the output fade color.

Red

0 - [16] - 255

This sets the red level.

Green

0 - [16] - 255

This sets the green level.

Blue

0 - [16] - 255

This sets the blue level.

«
...
48
49
50
51
52
...
»

Содержание V-40HD





























































Отзывы:

Нет отзывов