Roland V-02HD Скачать руководство пользователя страница 10

10

IMPORTANT NOTES

 WARNING

Concerning the Auto Off function

The power to this unit will be turned off automatically 

after a predetermined amount of time has passed 

since it was last used for playing music, or its buttons 

or controls were operated (Auto Off function). If you do 

not want the power to be turned off automatically, disengage the 

Auto Off function (p. 5).

Secure a sufficient amount of space at the setup location

Since this unit normally emits a slight amount of heat, 

make sure to secure sufficient space around it, as shown 

below.

30 cm (12 in.) or 

greater

20 cm (8 in.) or greater

20 cm (8 in.) or greater

15 cm (6 in.) 

or greater

5 cm (2 in.) or 

greater

Side

Front

Use only the supplied AC adaptor and the correct voltage

Be sure to use only the AC adaptor supplied with the 

unit. Also, make sure the line voltage at the installation 

matches the input voltage specified on the AC adaptor’s 

body. Other AC adaptors may use a different polarity, or be 

designed for a different voltage, so their use could result in 

damage, malfunction, or electric shock.

Use only the supplied power cord

Use only the attached power cord. Also, the supplied 

power cord must not be used with any other device.

 CAUTION

Keep small items out of the reach of children

To prevent accidental ingestion of the parts listed 

below, always keep them out of the reach of small 

children.

•  Included Parts: Cord hook
•  Removable Parts: Screw 

Handle the ground terminal carefully

If you remove the screw from the ground terminal, be 

sure to replace it; don’t leave it lying around where it 

could accidentally be swallowed by small children. When 

refastening the screw, make that it is firmly fastened, so 

it won’t come loose.

Power Supply

•  If the unit has been used with a power supply that has not been 

specified as suitable for the unit, the subsequent performance 

and operation of the unit can no longer be guaranteed. Also 

note that we may not be able to accept the unit for servicing 

and repairs.

•  Place the AC adaptor so the side with the indicator faces 

upwards and the side with textual information faces downwards. 

The indicator will light when you plug the AC adaptor into an 

AC outlet.

Placement

•  Depending on the material and temperature of the surface on 

which you place the unit, its rubber feet may discolor or mar the 

surface. 

Repairs and Data

•  Before sending the unit away for repairs, be sure to make a 

backup of the data stored within it; or you may prefer to write 

down the needed information. Although we will do our utmost 

to preserve the data stored in your unit when we carry out 

repairs, in some cases, such as when the memory section is 

physically damaged, restoration of the stored content may 

be impossible. Roland assumes no liability concerning the 

restoration of any stored content that has been lost.

Additional Precautions

•  Any data stored within the unit can be lost as the result of 

equipment failure, incorrect operation, etc. To protect yourself 

against the irretrievable loss of data, try to make a habit of 

creating regular backups of the data you’ve stored in the unit.

•  Roland assumes no liability concerning the restoration of any 

stored content that has been lost.

•  This unit allows you to switch images at high speed. For some 

people, viewing such images can cause headache, nausea, or 

other discomfort. Do not use this unit to create video that might 

cause these types of health problems. Roland Corporation will 

accept no responsibility for any such health problems that may 

occur in yourself or in viewers.

•  Do not use connection cables that contain a built-in resistor.
•  This document explains the specifications of the product at the 

time that the document was issued. For the latest information, 

refer to the Roland website.

Intellectual Property Right

•  It is forbidden by law to make an audio recording, video 

recording, copy or revision of a third party’s copyrighted work 

(musical work, video work, broadcast, live performance, or other 

work), whether in whole or in part, and distribute, sell, lease, 

perform or broadcast it without the permission of the copyright 

owner.

•  Do not use this product for purposes that could infringe on a 

copyright held by a third party. We assume no responsibility 

whatsoever with regard to any infringements of third-party 

copyrights arising through your use of this product.

•  This product can be used to record or duplicate audio or visual material 

without being limited by certain technological copy-protection 

measures. This is due to the fact that this product is intended to be used 

for the purpose of producing original music or video material, and is 

therefore designed so that material that does not infringe copyrights 

belonging to others (for example, your own original works) can be 

recorded or duplicated freely.

•  Roland is an either registered trademark or trademark of Roland 

Corporation in the United States and/or other countries.

•  Company names and product names appearing in this document 

are registered trademarks or trademarks of their respective 

owners.

USING THE UNIT SAFELY

Содержание V-02HD











Отзывы: