Roland SP-404MK2 Скачать руководство пользователя страница 76

Страница: 76 / 136

Setting the Tempo

Setting the Tempo in Time with the Rhythm (Tap Tempo)

This feature lets you set the tempo in an intuitive way by tapping the pad in time, as if you were clapping out the beat.

This is useful function when you want to play in time with other instruments or to the rhythm of a song.

The tap tempo function is enabled when the [SUB PAD] button is blinking orange.

On the input setting screen and other screens, tap tempo is automatically enabled.

Hold down the [SHIFT] button and press the pad [11].

This enables the tap tempo function. When this happens, the [SUB PAD] button blinks orange.

Tap the [SUB PAD] button several times in time with the beat.

The tempo (BPM) appears on the screen to indicate the interval (timing) at which you’re tapping the [SUB PAD] button.

Once you’ve confirmed the tempo setting, press the [EXIT] button.

This exits the tap tempo screen. This tempo is set for the project or bank.

Содержание SP-404MK2









































































































































Результаты поиска

Содержание SP-404MK2

Отзывы:

Roland SP-404MK2, Справочное руководство, Страница: 76 / 136

Результаты поиска

Содержание SP-404MK2

Отзывы: