Roland SP-404MK2 Скачать руководство пользователя страница 124

Страница: 124 / 136

Appendix

124

Cloud Delay

Adds multiple delays to the dry sound, as well as reverberations for a thick “cloudy” effect.

Parameter

Value

Explanation

WINDOW

0–100

Adjusts the interval for the delayed sound.

Larger settings produce a deeper reverberation.

PITCH

-12–+12

Adjusts the volume of the pitch shifter for the effect sound.

BALANCE

100-0–0-100 (%)

Adjusts the volume balance between the dry (original) sound and effect sound.

FEEDBACK

0–99 (%)

Adjusts the amount of feedback for the effect.

CLOUDY

0–100

Adjusts the thickness of the effect sound.

LO-FI

OFF, ON

When this is ON, the tonal character of the effect sound is degraded.

Back Spin

This gives the effect of spinning a record backwards.

Parameter

Value

Explanation

LENGTH

1/1, 1/2, 1/4, 1/8,

1/16

Sets the length of the back spin.

SPEED

0–100

Sets the speed of the back spin.

BACK SW

OFF, ON

If you turn this ON while a sound is playing, the back spin plays for a length of time

specified by the LENGTH parameter.
Turn this OFF to disable the back spin.

After switching to this effect, the sample must be played back (charged) for up to

approximately three seconds.

The BACK SW parameter blinks during charging.

Auto Pitch

Processes the human voice to create a variety of characters.

This is enabled with INPUT FX.

Parameter

Value

Explanation

PITCH

-100–100

Sets the pitch of the voice. You can change the pitch up and down one octave.

FORMANT -100–100

Sets the formant of the voice. Lower settings give a more masculine vocal

character, and higher settings give a more feminine vocal character.

BALANCE

100-0–0-100 (%)

Adjusts the volume balance between dry (the original sound) and effect sound.

AT PITCH

0–100

Adjusts the strength at which the pitch is corrected.

KEY

CHROMA, A, B

, B, C, D

, D,

, E, F, G

, G, A

Adjusts the key to which the pitch is corrected.

ROBOT

OFF, ON

When this is turned ON, the inputted voice is altered to a voice without

inflection, staying at the same pitch.

Vocoder

Changes the voice to a vocoder voice.

This is enabled with INPUT FX.

Содержание SP-404MK2









































































































































Результаты поиска

Содержание SP-404MK2

Отзывы:

Похожие инструкции для SP-404MK2

Бренды по названию

Популярные бренды

Roland SP-404MK2, Справочное руководство

Результаты поиска

Содержание SP-404MK2

Отзывы:

Похожие инструкции для SP-404MK2

Бренды по названию

Популярные бренды