9
Panel Descriptions
Rear Panel (Connecting Your Equipment)
To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
1
2
3
4
5
6
7
8
9
10
MIDI device
Turntable
(analog)
Turntable
(analog)
Powered speaker
Powered speaker, amp
Microphone
Audio player
DJ player
1
PC port
Use the included USB cable to connect this port to your computer.
To connect this to your computer, you must install the USB driver.
&
“Installing the Software” (p. 3)
Computer
2
MIDI OUT connector
This outputs MIDI messages such as MIDI clock.
3
MIC IN jack
Connect your microphone here.
MEMO
In “System Settings” (p. 21), you can specify dedicated effects (reverb,
delay) for the mic input.
4
[MIC SENS] knob
Adjusts the mic input sensitivity.
5
INPUT (CH 1, CH 2) jacks
These jacks input sound to channels 1, 2. These jacks support phono input
from MM-type cartridges.
