Roland RP102, Руководство пользователя

Страница: 6 / 27

6
Making Settings on the RP102
Hearing Sound from the Built-in Speakers
and the External Speakers
With the factory settings, the built-in speakers do not produce
sound if the external amplifiered speakers are connected to the
PHONES jack. However, you can change this setting so that sound
is output from the built-in speakers even if the external speakers
are connected to the PHONES jack.
* When you change the setting, the character from the external
speakers will change.
1
While holding down the volume (up) and volume
(down) buttons, press the [Function] button.
2
Press the [Function] button to change the setting.
When the external speaker
are connected to the
PHONES jack
Volume indicators
Sound is output only from
the external speakers
Blinking
Lit
Sound is output from both
the external speakers and
the built-in speakers
Blinking
Unlit
3
To complete the operation, press the volume (up)
button or volume (down) button.
Saving the Settings (Memory Backup)
When this unit’s power is turned off, it will return to its default
settings. However, if desired, you can save the following settings
so that they will be remembered even after the power is off. This is
called the “Memory Backup” function.
Settings saved by Memory Backup Page
Ambience p. 4
Brilliance p. 4
Key Touch p. 5
Metronome (Volume) p. 4
Master Tuning p. 5
SMF Play Mode
p. 4
Hearing sound from the built-in speakers and the
external speakers
p. 6
1
Hold down the [Function] button and press the
volume (up) button.
Blinking
Lit
Unlit
2
To save the setting, press the volume (up) button.
To cancel, press the volume (down) button or the [Function]
button.
Restoring the Factory Settings
(Factory Reset)
The settings you’ve changed in the function mode can be restored
to their factory-set condition.
NOTE
When you execute a factory reset, all settings will be
initialized.
1
While holding down the volume (up) button and
the [Function] button, turn on the power and
continue holding the volume (up) button and
[Function] button.
When the volume indicators appear as follows, release the
buttons.
Blinking
Lit
Unlit
2
To execute the factory reset, press the volume (up)
button.
To cancel, press the volume (down) button or the [Function]
button.
Factory reset currently
executing
Blinking
Completed
Blinking
* Never turn off the power while factory reset is being executed.
3
Turn the power off, then on again.
Settings that are saved automatically
On the unit, the following settings are saved automatically.
Setting Page
Bulit-in speakers volume p. 2
Headphones volume p. 2
All settings for the Bluetooth function p. 5
Auto off
p. 5