3
Receiving the Remote Control Messages
Receiving in Standard Mode
In order to receive remote control messages, set parameters as below.
MIDI OUT
If you are connecting multiple V-1HD units in a chain, set this to “THRU.”
MIDI Rx CHANNEL
Set this value according to the master device channel.
You can remote control the following functions from an external MIDI device.
* For corresponding MIDI messages, refer to “MIDI Implementation” (p. 5).
•
Audio input volume control for HDMI 1–4, AUDIO IN, and MIC.
•
Volume control of output audio.
•
Selection of input video channel.
•
Output fade of the video.
•
Selection of the transition effect.
•
Adjustment of transition time.
•
Selection of the composition effect and On/Off.
•
Key composition function on/off.
•
Selection of the key channel.
•
Adjustment of key level
•
Turning On/Off of the freeze function.
•
Adjustment of the video effect.
•
Switching between memory numbers.
Receiving in MVC Mode
In order to receive remote control messages, set parameters as below.
MIDI OUT
If you are connecting multiple V-1HD units in a chain, set this to “THRU.”
MIDI DEVICE ID
Set this value according to the master device channel.
You can remote control the following functions from a device supporting MVC after sending MVC ON message to the V-1HD.
* For corresponding MIDI messages, refer to “1-2. MIDI Visual Control Mode” (p. 6) in “MIDI Implementations.”
•
Volume control of output audio.
•
Selection of input video channel.
•
Output fade of the video.
•
Selection of the transition effect.
•
Adjustment of transition time.
Receiving in V-LINK Mode
In order to receive remote control messages, set parameters as below.
MIDI OUT
If you are connecting multiple V-1HD units in a chain, set this to “THRU.”
MIDI DEVICE ID
Set this value according to the master device channel.
You can remote control the following functions from a device supporting V-LINK after sending V-LINK ON message to the V-1HD.
* For corresponding MIDI messages, refer to “1-3. V-LINK Mode” (p. 7) in “MIDI Implementations.”
•
Volume control of output audio.
•
Selection of input video channel.
•
Output fade of the video.
•
Selection of the transition effect.
