Roland ROL-V-1HD, Руководство пользователя

Страница: 9 / 22

MIDI Implementation
9
„ z
Data Set 1 (DT1)
This is the message of actual data transmission. Use this when you want to set data
to the unit.
Status Data Byte Status
F0H 41H, dev, 00H, 00H, 00H, 20H, 12H, aaH, F7H
bbH, ccH, ddH, ..., eeH, sum
Byte Explanation
F0H Exclusive Status
41H Manufacturer ID (Roland)
dev Device ID (dev: 00H–1FH,10H is default)
00H 1st byte of model ID (V-1HD)
00H 2nd byte of model ID (V-1HD)
00H 3rd byte of model ID (V-1HD)
20H 4th byte of model ID (V-1HD)
12H Command ID (RQ1)
aaH Address upper byte
bbH Address middle byte
ccH Address lower byte
ddH Data: actual data to transmit. Multiple byte data is sent in address order.
: :
eeH Data
sum Checksum
F7H
EOX (end of exclusive)
* Depending on the data type, the amount of single-time transmission is specified.
It is necessary to execute data request according to the specified first address and
size. Refer to the “3. Parameter Address Map” (p. 12) for address and size.
* See “Example of an Exclusive Message and Calculating a Checksum” (p. 20) for
checksum.
* Data exceeding 256 bytes should be divided into packets of 256 bytes or smaller. If
you send data set 1 successively, set interval of 20 ms or longer between packets.
„ z
MIDI Visual Control Message
Status Data Byte Status
F0H 7EH, dev, 0CH, 01H, F7H
aaH, bbH, ccH, ddH, ...,eeH, sum
Byte Explanation
F0H System Exclusive Status
7EH Universal System Exclusive Non-Realtime Header
dev Device ID (dev : F00H–1FH; MVC default= 00H)
0CH Sub ID #1 (MIDI Visual Control)
01H Sub ID #2 (MVC command set ID; 01H= “Version 1.0”)
aaH Upper byte of the address
bbH Address
ccH Address
ddH
Actual Data: The data body. The data of multiple bytes should
be submitted in address order.
: :
eeH Data
sum Checksum
F7H
EOX (End of Exclusive)
* Depending on the data type, the amount of single-time transmission is specified.
It is necessary to execute data request according to the specified first address and
size. Refer to the “3-2. MIDI Visual Control” (p. 18) for address and size.
* See “Example of an Exclusive Message and Calculating a Checksum” (p. 20) for
checksum.
* Data exceeding 256 bytes should be divided into packets smaller than 256 bytes. If
you send sequentially, the intervals of packets should be longer than 20 ms.
„ z
V-LINK Message
Status Data Byte Status
F0H 41H, dev, 00H, 51H, 12H, F7H
aaH, bbH, ccH, ddH, ...,eeH, sum
Byte Explanation
F0H System Exclusive Status
41H ID Number (Roland)
dev Device ID (dev : 00H–1FH ; default is 10H)
00H Model ID upper byte (V-LINK)
51H Model ID lower byte (V-LINK)
12H Command ID (DT1)
aaH Upper byte of the address
bbH Address
ccH Address
ddH
Actual Data : The data body. The data of multiple bytes should
: :
eeH Data
sum Checksum
F7H
EOX (End of Exclusive)
* Depending on the data type, the amount of single-time transmission is specified.
It is necessary to execute data request according to the specified first address and
size. Refer to “3.3 V-LINK” (p. 19) for the address and data.
* See “Example of an Exclusive Message and Calculating a Checksum” (p. 20) for
checksum.
* Data exceeding 256 bytes should be divided into packets smaller than 256 bytes. If
you send sequentially, the intervals of packets should be longer than 20 ms.