28
Other Functions
Using a USB Flash Drive
If you connect a USB flash drive (sold separately) to the USB MEMORY
port, you can back up all settings (or the settings of an individual kit
that you specify) to the USB flash drive.
Saving/Loading Settings
NOTE
5
Never insert or remove the USB flash drives while this unit is
turned on. Doing so may corrupt the unit’s data or the data on the
USB flash drives.
5
Taking care that the connector of the USB flash drive is oriented
correctly, insert it all the way into the port. Do not use excessive
force.
5
Do not strike the pads while data is being saved or loaded. The
vibration might cause an error to occur. While the USB settings
screen is shown, sound is not produced even if you strike a pad.
1.
Press the [SYSTEM] button.
2.
Use the [
K
][
J
] buttons to select “USB MEMORY.”
3.
Press the [ENTER] button.
The USB MEMORY screen appears.
4.
Use the [
K
][
J
] buttons to select a function.
Function
Explanation
SaveAll
Backs-up all of the OCTAPAD’s settings to the
USB flash drive.
LoadAll
Loads previously-saved backup data from the
USB flash drive into the OCTAPAD.
DelAll
Deletes individual items of previously-saved
backup data from the USB flash drive.
SaveKit
Backs-up the settings of the individual
OCTAPAD kit that you specify to the USB flash
drive.
Function
Explanation
LoadKit
Loads the individual kit that you specify from
the USB flash drive into the OCTAPAD (p. 30).
DelKit
Deletes backup data of a previously-saved
individual kit from the USB flash drive.
Format
Formats the USB flash drive.
SaveAll
1.
Access the USB MEMORY screen (p. 28).
2.
Select “SaveAll,” and then press the [ENTER] button.
3.
Use the [–][+] buttons to specify the save-
destination, and then press the [ENTER] button.
4.
Use the [
K
][
J
] buttons and the [–][+] buttons to
specify a name for the backup, and then press the
[ENTER] button.
%
[ENTER]
5.
Press the [ENTER] button to save the data.
All settings of the OCTAPAD are backed-up to the USB flash drive.
If you decide to cancel, press the [EXIT] button.
LoadAll
1.
Access the USB MEMORY screen (p. 28).
2.
Select “LoadAll” and then press the [ENTER] button.
Содержание OCTAPAD SPD-20 PRO
