Roland OCTAPAD SPD-20 PRO, Руководство пользователя

Страница: 11 / 136

11
Performing
Turning the Power On/Off
1.
Use the POWER switch (p. 9) to turn the power
on/off.
* The power to this unit will be turned off automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
Off function). If you do not want the power to be turned off
automatically, disengage the Auto Off function (p. 31).
To restore power, turn the power on again.
* Before turning the unit on/off, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/off. However, this is normal and
does not indicate a malfunction.
Selecting a Kit
When you switch kits, the sounds of all pads are switched together.
1.
Press the [KIT] button.
2.
Use the [–][+] buttons to select a kit.
Kit number: Kit name Kit number
* If you hold down the [SHIFT] button and use the [–][+] buttons, the
kit number changes in steps of ten.
About the icons shown in the upper right of the screen
Icon Meaning
Shown if the kit’s MFX is on (p. 17).
Shown if the kit’s ambience is on (p. 17).
Button operation is disabled.
Disabling Button Operation
While the kit selection screen is shown, you can disable operation
of the buttons and footswitch to prevent the settings from being
changed by inadvertently pressing a button or footswitch.
1.
Hold down the [SHIFT] button and press the [KIT]
button.
A lock symbol appears in the upper right of the screen.
To unlock, once again hold down the [SHIFT] button and press the
[KIT] button.
* You can’t disable button operation in other than the kit selection
screen.
Stopping All Currently-Heard Sound
You can stop all currently-heard sound.
1.
Hold down the [SHIFT] button and press the [EXIT]
button.
The screen indicates “All Sound Off.”
KIT CHAIN Function
The Kit Chain function allows you specify the order in which kits will
switch. Very convenient for live performance.
For detail, see “Recalling Kits in a Specific Order” (p. 20).
Footswitch
Footswitches can be used to change kits.
For detail, see “Assigning the Footswitch” (p. 25).