31
B)
At the [Set the maximum cutting depth] screen, for [Ro-
tary Option], click [0] and make the setting for [Depth].
Next, click [180], for example, and set the depth for the
second surface. Continue in this way to set the depth for
all of the respective cutting surfaces. You can also change
these values using the [Settings for Multiple-surface Cut-
ting] wizard.
C)
The setting for [Finish] is not made here. It is made
below, using the [Settings for Multiple-surface Cutting]
wizard.
2
Click [Start] to display the [Settings for Multiple-surface
Cutting] wizard.
Click each [degree] and make the setting for [Depth].
The setting for [Finish] is not made here.
Part 6 Cutting Using MODELA Player ver. 3
