4
To listen through
headphones—
•
connect your headphones’ 1/4” plug to
the JUNO-Di’s rear-panel PHONES jack. If you’re using
earbuds or other headphones that have a stereo mini
plug, you’ll need a stereo-mini-to-stereo-1/4” adaptor.
keyboard/guitar amp—
•
connect the JUNO-Di to the amp in mono or
stereo, depending on the amp. If you’re using a
mono amp—
•
connect the JUNO-Di’s OUTPUT L (MONO) jack to
an amp input.
stereo amp—
•
connect the JUNO-Di’s OUTPUT L (MONO) and R
jacks to the amp’s left and right inputs, respectively.
Match the battery-powered JUNO-Di with Roland’s battery-powered
CUBE Street or MOBILE CUBE, and you’ve got a rig you can take
anywhere.
mixer or powered speakers—
•
connect the JUNO-Di’s OUTPUT L (MONO)
and R jacks to two of your mixer’s or speakers’ input channels.
Powering Up and Setting Your Listening Level
Turn the JUNO-Di’s main VOLUME knob all the way
1
down to avoid blasting your ears or system.
Press in the JUNO-Di’s rear-panel POWER switch to turn
2
on the JUNO-Di.
Once the JUNO-Di’s finished starting up, you’ll be on
this screen.
3
If you’re listening on headphones, skip to Step 4. Otherwise, raise the
level of your amp, mixer, or speakers to a normal level.
As you play the JUNO-Di keyboard, slowly raise the
4
JUNO-Di’s VOLUME knob to set your listening level.
The JUNO-Di Controls
A setting on the JUNO-Di is called a “parameter.” To change a parameter’s
value, you select it so it’s underlined, as shown here.
Here, the patch number is underlined and therefore selected.
