Roland HP504, Руководство пользователя

Страница: 12 / 72

Panel Descriptions
Phones Jacks
Here you can connect stereo headphones.
The HP504 has two headphone jacks, two people can
also use headphones simultaneously.
A Headphones 3D Ambience effect will be applied,
producing the sensation that the sound is emanating
from the piano itself even when using headphones.
* The Headphones 3D Ambience effect applies only to piano
sounds; it does not apply to other sounds.
* You can also turn the Headphones 3D Ambience effect off (p. 48).
* You can use the [Ambience] button to adjust the Headphones 3D
Ambience effect.
Input jack
If a digital audio player
or other audio playback
device is connected here,
you’ll be able to listen to
its playback through the
HP504.
Use the controls of your
audio playback device to
adjust the volume.
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
* When connection cables with resistors are used, the volume level of equipment connected to the Input jack may be low. If this happens, use connection cables that do
not contain resistors.
Output Jacks
If you connect these jacks to
amplified speakers, the sound
of HP504 will be heard through
them.
* Before turning off the power of the
unit, you must first turn off the power
of the devices that are connected to the
Output jacks.
Rear side
DC In Jack
Connect the
included AC
adaptor here.
* Before making this connection,
you must make sure that the
[Power] switch is off.
Pedal Connector
Connect
the pedal
cord of the
dedicated stand to this
connector.
page 66
page 66
Rear Panel and Bottom Panel (HP504)
12