Roland HP504, Руководство пользователя

Страница: 11 / 72

Panel Descriptions
Phones Jacks
Here you can connect stereo headphones.
The HP506 has two headphone jacks, two people can
also use headphones simultaneously.
Input jack
If a digital audio player or other audio
playback device is connected here,
you’ll be able to listen to its playback
through the HP506.
The volume of the device connected
to the Input jack can be adjusted by
means of Input Volume (p. 50).
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
* When connection cables with resistors are used, the volume level of equipment connected to the Input jack may be low. If this happens, use connection cables that do
not contain resistors.
DC In Jack
Connect the
included AC
adaptor here.
* Before making this connection,
you must make sure that the
[Power] switch is off.
Pedal Connector
Connect the
pedal cord
of the dedicated stand to
this connector.
page 66 page 66
Output Jacks
If you connect these jacks to
amplified speakers, the sound of
HP506 will be heard through them.
* Before turning off the power of the
unit, you must first turn off the power
of the devices that are connected to the
Output jacks.
Rear side
Rear Panel and Bottom Panel (HP506)
A Headphones 3D Ambience effect will be applied,
producing the sensation that the sound is emanating
from the piano itself even when using headphones.
* The Headphones 3D Ambience effect applies only to piano sounds; it does
not apply to other sounds.
* You can also turn the Headphones 3D Ambience effect off (p. 48).
* You can use the [Ambience] button to adjust the Headphones 3D Ambience
effect.
11
O
per
ation G
uide
Panel Descriptions
Bef
or
e
You P
la
y
Per
forming
Pr
ac
ticing
Con
venien
t F
unc
tions
A
ppendix
Func
tion M
ode