Roland FP-50, Руководство пользователя

Страница: 30 / 64

Saving Performance Settings (Registrations)
Saving Current Settings into a
Registration
Saving Performance Settings as Registrations (Buttons [1]–[4]).
With the factory settings, recommended performance settings have
already been stored. If you want to create an original registration,
we suggest that you start with registrations 4-1 through 4-5.
NOTE
When you save a registration into a location, it will overwrite any
registration already stored at that location.
1.
Set the desired performance settings: tone, rhythm, and
so on .
2.
While holding down the [SPLIT] and [TRANSPOSE]
buttons simultaneously, press a button from [1] to [4] to
select the registration .
3.
While continuing to hold down the [SPLIT] and
[TRANSPOSE] buttons simultaneously, press a button the
[–] [+] buttons to select a registration variation .
4.
Release the [SPLIT] and [TRANSPOSE] buttons .
The performance settings are saved.
NOTE
Do NOT turn off the power while “Working.” is displayed.
MEMO
You can reset all registrations to their factory defaults. For
details, refer to “Restoring the Factory Settings (Factory Reset)”
(p. 35).
Saving a Registration Set (Save
Registration Set)
You can save all registrations held in registration memory ([1]–[4])
into a registration set in internal memory or on a USB flash drive.
* If you’re saving to a USB flash drive, connect your USB flash drive
to the USB MEMORY port before proceeding.
1.
Press the [SONG] and [RHYTHM] buttons simultaneously .
2.
Press the [ ] [ ] (SLOW/FAST) buttons to select
“SaveRgst .”
3.
Press the [METRONOME] button .
4.
Press the [–] [+] buttons to select the destination memory .
Display Explanation
U (User)
Internal memory
S (USB)
USB flash drive
5.
Press the [ ] (FAST) button .
6.
Press the [–] [+] buttons to select the destination number .
If you see a registration name next to the number, the number is
already in use.
If you choose to save to a used number, your new registration will
replace the existing registration.
If you don’t want to erase an existing registration, save to a number
where the name column shows “(Empty).”
7.
Press the [ ] (FAST) button .
8.
Renaming the registration set .
Button Operation
[–] [+] buttons
Change the character.
[ ] [ ] (SLOW/FAST)
buttons
Select the character to change.
If you decide to cancel, press the [REC] button.
9.
Press the [METRONOME] button .
The registration set is saved.
NOTE
Do NOT turn off the power while “Working.” is displayed.
10.
Press the [SONG] and [RHYTHM] buttons simultaneously
to finish .
30