Roland FP-50, Руководство пользователя

Страница: 26 / 64

Recording Your Performances
Starting and stopping recording
1.
Press the [ ] button .
Recording starts and the [REC] and [ ] buttons light.
2.
Press the [ ] button .
Recording stops, and the save confirmation screen appears.
MEMO
• When an ending is playing and the rhythm stops, or when
performing until the end of a song, recording continues so that
the final sustained sound is recorded, and therefore recording
does not stop automatically.
• If you want to check your performance, press the [ ]
button in the save confirmation screen to start playback.
Saving a recorded performance
1.
Press the [ ] (FAST) button .
The recording is saved on the USB flash drive.
By default, the recorded song is given the name “AUDIO.”
NOTE
Do NOT turn off the power or disconnect the USB flash drive
while “Working.” is displayed.
MEMO
You can select the save location and song name for your
recording (p. 26).
Erasing a recorded performance
1.
Press the [ ] (SLOW) button .
A confirmation message appears.
If you decide not to erase the performance, press the [ ] (SLOW)
button once again.
2.
Press the [ ] (FAST) button .
The recording is erased.
Listening to a recorded performance
1.
Press the [ ] button .
Playback starts from the beginning of the recorded performance.
Setting the Save Destination and
Song Name
You can select the save destination and song name for your
recording.
1.
Confirm that the save confirmation screen is displayed,
and press the [METRONOME] button .
2.
Press the [–] [+] buttons to select the desired storage
location .
Display Storage location
U (User)
Internal memory
S (USB)
USB flash drive
* Audio data cannot be saved in internal memory.
* “S (USB)” is available only if a USB flash drive (sold separately) is
connected to the USB MEMORY port.
3.
Press the [ ] (FAST) button .
The selection screen appears, so that you can set the destination-
side song number for the recording.
4.
Press the [–] [+] buttons to select the song number at the
save destination .
If a song name is displayed when you select a song number, a song
has already been saved in that number. If you select a song number
that already contains a song, the recorded song will be overwritten.
If you do not want to overwrite the previously recorded song, select
a song number that displays “(Empty)” as the song name.
5.
Press the [ ] (FAST) button .
The Entry screen appears, where you can enter the desired song
name.
6.
Change the song name .
Button Operation
[–] [+] buttons Change the character.
[ ] [ ] (SLOW/FAST)
buttons
Select the character to change.
* Note that character availability varies according to whether you
are saving an SMF file or an audio file.
If you decide not to save the song, press the [REC] button.
7.
Press the [METRONOME] button .
The song is saved.
NOTE
Do NOT turn off the power or disconnect the USB flash drive
while “Working.” is displayed.
26