Roland fp-30, Руководство по реализации MIDI

Страница: 34 / 38

MIDI Implementation
34
7
0202: Overdrive
0
Delay
This effect connects an overdrive and a delay in series.
No Parameter Value Description
1
Overdrive
Drive #1
0–127 0–127
Degree of distortion
Also changes the volume.
2
Overdrive
Pan
0–127 L64–63R
Stereo location of the
overdrive sound
3 Delay Mode 0–1 ms, note
When this is set to “note,” the
effect is synchronized with
the tempo.
4 Delay Time 0–127 1–2540 ms
Adjusts the delay time from
the direct sound until the
delay sound is heard. (ms)
5 Delay Time 0–21 note
Adjusts the delay time from
the direct sound until the
delay sound is heard. (note)
6
Delay
Feedback
49–89 0–+80 %
Adjusts the proportion of the
delay sound that is fed back
into the effect.
7
Delay HF
Damp
0–17
200–8000
Hz, Bypass
Adjusts the frequency above
which sound fed back to the
effect will be cut. If you do not
want to cut the high
frequencies, set this
parameter to Bypass.
8
Delay
Balance #2
0–100
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the delay (W)
and the sound that is not sent
through the delay (D).
9
Level 0–127 0–127 Output Level
7
0203: Distortion
0
Chorus
The parameters are essentially the same as in “Overdrive
0
Chorus,” with the
exception of the following two.
Overdrive Drive
0
Distortion Drive
Overdrive Pan
0
Distortion Pan
7
0204: Distortion
0
Flanger
The parameters are essentially the same as in “Overdrive
0
Flanger,” with the
exception of the following two.
Overdrive Drive
0
Distortion Drive
Overdrive Pan
0
Distortion Pan
7
0205: Distortion
0
Delay
The parameters are essentially the same as in “Overdrive
0
Delay,” with the
exception of the following two.
Overdrive Drive
0
Distortion Drive
Overdrive Pan
0
Distortion Pan
7
0206: Enhancer
0
Chorus
This effect connects an enhancer and a chorus in series.
No Parameter Value Description
1
Enhancer
Sens
0–127 0–127 Sensitivity of the enhancer
2 Enhancer Mix 0–127 0–127
Level of the overtones
generated by the enhancer
3
Chorus Pre
Delay
0–125 0.0–100.0 ms
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
4
Chorus Rate
Mode
0–1 Hz, note
When this is set to “note,” the
effect is synchronized with
the tempo.
5
Chorus Rate
#1
1–127
0.05–10.00
Hz
Frequency of modulation (Hz)
6 Chorus Rate 0–21 note
Frequency of modulation
(note)
No Parameter Value Description
7 Chorus Depth 0–127 0–127 Depth of modulation
8
Chorus
Balance #2
0–100
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the chorus (W)
and the sound that is not sent
through the chorus (D).
9
Level 0–127 0–127 Output Level
7
0207: Enhancer
0
Flanger
This effect connects an enhancer and a flanger in series.
No Parameter Value Description
1
Enhancer
Sens
0–127 0–127 Sensitivity of the enhancer
2 Enhancer Mix 0–127 0–127
Level of the overtones
generated by the enhancer
3
Flanger Pre
Delay
0–125 0.0–100.0 ms
Adjusts the delay time from
when the direct sound begins
until the flanger sound is
heard.
4
Flanger Rate
Mode
0–1 Hz, note
When this is set to “note,” the
effect is synchronized with
the tempo.
5
Flanger Rate
#1
1–127
0.05–10.00
Hz
Frequency of modulation (Hz)
6 Flanger Rate 0–21 note
Frequency of modulation
(note)
7
Flanger
Depth
0–127 0–127 Depth of modulation
8
Flanger
Feedback
0–98 -98–+98 %
Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative (-)
settings will invert the phase.
9
Flanger
Balance #2
0–100
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the flanger (W)
and the sound that is not sent
through the flanger (D).
10 Level 0–127 0–127 Output Level