Roland E-A7 Скачать руководство пользователя страница 70

Страница: 70 / 70

E-A7 Error Messages

Internal Storage/External Storage

(Problems with USB Memory)

Message

Meaning

Action

Device Full

There is insufficient free

space in Internal Storage or

External Storage (USB flash

drive).

Increase the amount of free

space by deleting or moving

unneeded data.

Disk Error

An error has occurred in the

memory.

Restart the E-A7. If this does

not solve the problem, con-

tact your dealer or Roland

customer service.

Flash Write Error.

Failed to write data.

Try writing the data again.

If this does not solve the

problem, restart the E-A7.

USB Device Not

Inserted

A USB flash drive is not

inserted.

Insert a USB flash drive.

USB Device

Protected

The USB flash drive’s protect

is enabled.

Disable the USB flash drive’s

protect.

Cannot read this

disk

The USB flash drive cannot

be read.

Format the USB flash drive.

If this does not solve the

problem, use a different USB

flash drive.

Formatting failed

Failed to format the USB

flash drive.

Try re-formatting the USB

flash drive. If this does not

solve the problem, use a

different USB flash drive.

Problems with Files or Data

Message

Meaning

Action

Style (Song) not

found / Audio File

load error

The specified style (SMF)

cannot be found.

Refer to

“Troubleshooting.”

The specified song (WAV or

MP3) cannot be found.

Cannot read this

file

There might be something

wrong with the selected file,

or it might be damaged.

Don’t use this file.

Failed to write data.

Try writing the data again.

If this does not solve the

problem, restart the E-A7.

Unsupported file

format

There is something wrong

with the file’s type (format),

or it might be damaged.

Don’t use this file.

Not Exist

The specified file or folder

does not exist.

—

Same name fold-

er (file) exist!

Execution is not possible

because a folder (file) of the

same name exists.

Move, delete, or rename the

folder (file).

Please enter a

valid file name

The selected file uses char-

acters that cannot be used

on the E-A7.

Rename the file.

The file name is

too long. Rename

in less than 10

characters.

The phrase file name is too

long.

Rename the phrase file

name to ten characters or

less.

Too many events

The SMF file size is too large

(it contains too much data).

The file exceeds the size of

data that the E-A7 can han-

dle. Do not use this file.

Too many Lyrics

data

The size of the lyrics data

is too large (it contains too

much data).

The lyrics exceeds the size

of data that the E-A7 can

handle. Do not use this file.

Problems with Operations or Functions

Message

Meaning

Action

Can’t Execute.

Song (Style) Is

Running.

This operation cannot be ex-

ecuted while a song (style)

is playing.

Stop the song (style) and

then execute the operation.

Too many files

selected

Too many files were found

by the Finder function.

The Finder function can

find a maximum of 99 files.

Reduce the number of files,

for example by increasing

the number of characters for

which you are searching.

Backup already

exists on selected

device

A backup folder already

exists.

Move, delete, or rename the

existing backup folder.

Problems with Sampling or Sample

Import

Message

Meaning

Action

Memory Full!

Saving is not possible

because there is insufficient

user sample memory.

Delete unneeded data by

executing delete, optimize,

truncate, or cleanup.

No Room!

No further samples can be

saved.

Delete unneeded samples.

Unknown

Format!

This file is a format (type)

that the E-A7 cannot import.

(Only 44.1 kHz 16-bit

WAV format files can be

imported.)

—

Cannot Read!

Failed to load data from USB

flash drive.

Make sure that the USB flash

drive is inserted correctly.

Sample Length

Too Short!

The sample is too short

to use.

—

Sample Length

Too Long!

The sample is too long to

use.

—

Empty Sample!

The sample contains no

data.

Select a sample that con-

tains data.

Cannot Execute!

Execution is not possible

because no data (file) is

selected.

Select data (file) containing

data on which the operation

can be executed.

Содержание E-A7






































































Результаты поиска

Содержание E-A7

Отзывы:

Похожие инструкции для E-A7

Бренды по названию

Популярные бренды

Roland E-A7, Справочное руководство

Результаты поиска

Содержание E-A7

Отзывы:

Похожие инструкции для E-A7

Бренды по названию

Популярные бренды