Roland E-A7 Скачать руководство пользователя страница 44

Страница: 44 / 70

Style Composer

NOTE

If you want to save the modified data, save the style (p. 42).

If you want to return to the state prior to editing, execute the

UNDO operation (p. 42).

Delete

Unlike the

“Erase”

function,

“Delete”

not only erases the data but

also the measures, beats and/or CPT units, so that all data that lie

behind the

“To”

position are shifted towards the beginning of the

track(s). You cannot choose the data type to be erased.

Parameter

Value

Explanation

Track

Adrm–Acc6,

ALL

Allows you to select the track you

wish to edit. Select

“ALL”

to edit all

tracks.

Mode

Major, Minor,

7th

Allows you to select the Mode to be

edited.

Division

Intro 1–4, Main

1–4, Fill 1–4,

End 1–4

Use this parameter to select the

Division you want to edit.

From Bar– To CPT

See page 43.

Specify the parameters, and press the

[Exec]

(F5) button to execute

the operation.

NOTE

If you want to save the modified data, save the style (p. 42).

If you want to return to the state prior to editing, execute the

UNDO operation (p. 42).

Copy

This function can be used to copy individual tracks, Modes and

Divisions to replace existing parts.

Press the

[F2]

(Src) button to access the copy-source

settings page.

The following parameters are displayed:

Parameter

Value

Explanation

Style

Selects the copy-source style.
Use the style category buttons to

open the style list, and select a style.
After you have selected a style, use

the

[Exit]

button to return to the

previous page. You can also press

the style

[User Int/Ext]

button to

select user styles that are saved in

Internal Storage or External Storage

(USB flash drive).

Track

Adrm–Acc6,

ALL

Allows you to select the track you

wish to copy. Select

“ALL”

to edit

all tracks.

Mode

Major, Minor,

7th

Allows you to select the Mode to be

copied.

Division

Intro 1–4,

IntroALL, Main

1–4, MainALL,

Fill 1–4, End

1–4, EndALL

Use this parameter to select the

Division you want to copy.

From Bar– To CPT

See page 43.

You can press the

[F4]

(Prev) button to audition the copy-source

data.
However, auditioning is not possible if All is selected for Track or

Division.

Press the

[F1]

(Dest) button to access the copy-

destination settings page.

Parameter

Value

Explanation

Track

Adrm–Acc6,

ALL

Allows you to select the track you

wish to edit. Select

“ALL”

only to

replace all tracks.

Mode

Major, Minor,

7th

Allows you to select the Mode to be

edited.

Division

Intro 1–4, Main

1–4, Fill 1–4,

End 1–4

Allows you to select the Mode to be

edited.

Into Bar
Into Beat
Into CPT

The” Into” position indicates where the beginning of

the source excerpt will be after the copy operation. To

copy the source data to the beginning of the destina-

tion track, select BAR=

“1,”

BEAT=

“1”

and CPT=

“0 ”

Copy Mode

Replace

The data in the selected range of the

source track overwrite the destina-

tion track.

Mix

The data in the selected range of the

source track are added to the data

on the destination track.

Copy Times

1–255

Allows you to specify the number

of copies to be made. Select

“1”

copy the excerpt only once.

You can press the

[F4]

(Prev) button to audition the copy-destination

data.
However, auditioning is not possible if All is selected for Track or

Division.

NOTE

AccDrums data can also be copied to other tracks (preferably

Acc1–Acc6). You can only copy ABass data to other ABass tracks. If

you selected

“ALL”

for

“Source–Track,”

this

“Track”

parameter is

also set to

“ALL ”

If you selected

“ALL”

for

“Source–Mode”

“Source–Division,”

this

“Mode”

“Division”

parameter is also set to

“ALL ”

Specify the parameters, and press the

[Exec]

(F5) button to execute

the operation.

NOTE

If you want to save the modified data, save the style (p. 42).

If you want to return to the state prior to editing, execute the

UNDO operation (p. 42).

Insert

“Insert”

allows you to insert space and shift data that lie behind

the

“From”

position further towards the end of the track (this is the

exact opposite of

“Delete”

). The empty measures you create can be

“filled”

using the

“Copy”

function or by recording new phrases in

that area.

Содержание E-A7






































































Результаты поиска

Содержание E-A7

Отзывы:

Бренды по названию

Популярные бренды

Roland E-A7, Справочное руководство

Результаты поиска

Содержание E-A7

Отзывы:

Бренды по названию

Популярные бренды