16
User Program Edit Parameters
For ritardandos that apply to Ending patterns proceed as follows:
5
Press the
[START/STOP]
button to start playback.
5
Press the
[ENDING]
button twice in succession (
“double-click”
).
Melody Intelligent Parameters
This function group can be selected using
[MENU]
0
“User
Program Edit”
0
“Melody Intelligent ”
The Melody Intelligent part on/off setting and some of the
parameters can also be edited in the Keyboard Part Mixer screen.
&
Keyboard Part Mixer (p. 11)
The following parameters are available:
Switch
Select
“On”
if you want to add a MELODY INTELL part.
This part is triggered by the chord recognition of the E-A7’s
Automatic Accompaniment and plays automatic harmonies that are
added to the melody that you are playing using the Upper 1 part.
You can choose from among 18 harmony types (see below).
Parameter
Value
Switch
Off, On
NOTE
This
“Switch”
parameter can also be assigned to an optional
pedal switch. See
“Pedal Switch and Pedal Control”
Type
Allows you to select one of the 18 harmony types:
Parameter
Value
Type
1:
Duet,
2:
Organ
3:
Combo,
4:
Strings,
5:
Choir,
6:
Block,
7:
Big Band,
8:
Country,
9:
Traditional,
10:
Brodway,
11:
Gospel,
12:
Romance,
13:
Latin,
14:
Country Guitar,
15:
Country Ballad,
16:
Waltz Organ,
17:
Octave Type1,
18:
Octave Type2
NOTE
The most suitable tone for the Type is assigned. When you switch
the Type, this means that the tone of the Upper1 part may also
change. After selecting the desired Type, you can select the
Upper1 tone.
2nd Tone
Depending on the selected
“Type”
setting, a second harmony is
added to the
“Melody Intelligent”
part. If you like, you can select
the desired Tone for the second harmony voice using this parameter.
Parameter
Value
2nd
The Tone of the selected family
Intell Threshold
This value represents the lowest velocity value (between
“0”
and
“127”
) of the Upper 1 part that triggers the
“Melody Intelligent”
part.
If you don’t need this switching function, select
“0 ”
Parameter
Value
Intell Threshold
0–127
The following parameters are valid for the 2nd tone.
Level
Allows you to set the level of the
“Melody Intelligent”
part to
ensure that the harmonies blend in with the rest.
Parameter
Value
Level
0–127
Expression Pedal
This parameter allows you to specify whether or not the
“Melody
Intelligent”
part should respond to movements of the optional
expression pedal you connected, and change its volume accordingly.
Parameter
Value
Expression Pedal
Off, On
Hold Pedal
This parameter allows you to specify whether or not the
“Melody
Intelligent”
part’s notes can be held with the pedal switch
connected to the PEDAL HOLD/SWITCH socket.
Parameter
Value
Hold Pedal
Auto, On, Off
“Auto”
means that the
“Melody Intelligent”
part only responds to
Hold messages if it is assigned to the right half (Split) or the
entire keyboard.
“On”
means that the
“Melody Intelligent”
part always responds to
Hold messages, even if it is assigned to the left half of the
keyboard.
“Off”
means that the
“Melody Intelligent”
part does not respond to
Hold messages.
Asgn Lever H (Assignable Lever Horizontal)
This parameter allows you to specify for each keyboard part how it
should respond to left/right movements of the assignable lever.
Parameter
Value
Asgn Lever H
Auto, On, Off
“Auto”:
The keyboard part only responds to left/right movements
of the lever when no split setting causes it to be to the left
of other keyboard parts. In other words: parts you can play
with your left hand after selecting a split no longer respond.
But they will while the keyboard is not split.
“On”:
The keyboard part always responds to left/right movements of
the assignable lever.
“Off”:
The part in question does not respond to left/right
movements of the assignable lever.
Bender Range (Pitch Bend Range)
This parameter specifies the amount of pitch change (in semitone
units) that occurs if pitch bend is assigned to the assignable lever or
control pedal.
Parameter
Value
Bender Range
0–24
Asgn Lever V (Assign Lever Vertical)
This parameter allows you to specify for each keyboard part how it
should respond to backward movement of the assignable lever.
Parameter
Value
Modulation Assign
Auto, On, Off
