Roland ColorCAMM PNC-5000, Руководство пользователя

Страница: 5 / 19

3
2 Part Names and Functions
2-1 Front View
1 Checking Supplied Items / 2 Part Names and Functions
1 Checking Supplied Items
Check the following to make sure that you received all the items that were shipped along with the unit.
• Power Cord : 1 • Thermal transfer ribbon cartridge : 1
• Blade (Carbide) : 1 • Blade Holder : 1
• Roller Base : 1 • Cutter Tool : 1
• Material for Test Cuts : 1 • Alignment Tool : 1
• Head Cleaner : 1 • Cleaning Sheet for Printing Head : 1
• Hexagonal Screw Driver : 1 • User's Manual : 1
2-2 Rear View
Pinch Roller (Left)
Press material against the grit roller. When loading
material, place the left roller inside the left edge of the
material to correctly track it through the machine.
Guide Line
Align the material with these lines when loading.
Cutting Carriage
The blade holder is mounted here.
Serial (RS-232C) Input Connector
In a serial configuration, connect the serial cable here.
This cable carries data to your computer.
Parallel (Centronics)
Input Connector
In a parallel configuration,
connect the parallel cable
here. This cable carries
data to your computer.
DIP Switches
Used to make various
settings.
Pinch Roller (Right)
This presses the material against the grit roller.
Printing Carriage
The ribbon cartridge is mounted here.
Sheet Loading Lever
Used to raise or lower the pinch rollers
when loading or unloading material.
Power Switch
Power Connector (AC IN)
This connector accepts standard AC
power cord.
Cutter Force Control Slider
Sets the down force for the cutting tool.
Platen
Grit Roller (Left)
Grit Roller (Right)
Operation Panel
Guide Line
Align the material with
these lines when loading.