Roland A-88 Скачать руководство пользователя страница 50

Страница: 50 / 64

Troubleshooting

Problem

Confirmation

Resolution

No sound

Is the POWER indicator off?

Make sure that the unit is connected to the

computer correctly.

Could you have operated the pedal or D-BEAM

controller to lower the volume?

Try pressing the pedal or moving your hand

above the D-BEAM controller.

Cannot play or

record

Is the driver installed?

Install the driver (p. 17).

Are the software’s input device and output

device configured?

Select the A-88 as the input and output

device (p. 23).

Is the unit’s POWER indicator off?

Make sure that the unit is connected to the

computer correctly.
If the problem is not resolved, reinstall the

driver (p. 54).

Is the sound module connected to the MIDI

OUT cable receiving MIDI signals?

Confirm the settings of the sound module.

Is there another program using the unit?

Close all software that is using the unit; then

turn the unit’s [POWER] switch off, then back

on again.
If the problem is not resolved, reinstall the

driver (p. 54).

Did the computer enter standby (suspend)

mode, hibernate mode, or sleep mode while

the unit was connected?

Close all software that is using the unit; then

turn the unit’s [POWER] switch off, then back

on again.
If the problem is not resolved, restart the

computer.

Did you disconnect and reconnect the USB

cable while using the unit?

Was the unit connected to the computer while

the computer was starting up?

Connect the unit after the computer has

started up.
With some computers, the unit cannot be

used if it is connected to the computer while

the computer is starting up.

Did the computer perform a processor-

intensive task while you were using the unit?

Stop playback or recording, and then try

playing back or recording again.
If the problem is not resolved, close all

software that is using the unit; then turn the

unit’s [POWER] switch off, then back on again.

Windows 8/Windows 7/

Windows Vista

Are you using the Media Player included with

Windows?

Use different software.
MIDI devices cannot be selected in Media

Player.

Duplicate notes

sound

Is the sound module set to Local On?
Is the software’s THRU function turned on?

Configure as follows.
Sound module: Local Off

Software’s THRU function: Off
For details, refer to the owner’s manual for the

equipment you are using.

Could you have assigned the same MIDI

channel to UPPER and LOWER?

Assign different MIDI channels (p. 32).

Содержание A-88

































































Результаты поиска

Содержание A-88

Отзывы:

Похожие инструкции для A-88

Бренды по названию

Популярные бренды

Roland A-88, Руководство пользователя

Результаты поиска

Содержание A-88

Отзывы:

Похожие инструкции для A-88

Бренды по названию

Популярные бренды