Roland A-88 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 64

background image

IMPORTANT NOTES

7

Additional Precautions

• Roland assumes no liability concerning such loss

of data, nor any obligation to recover it.

• Use a reasonable amount of care when using the

unit’s buttons, sliders, or other controls; and when
using its jacks and connectors. Rough handling
can lead to malfunctions.

• When disconnecting all cables, grasp the

connector itself—never pull on the cable. This way
you will avoid causing shorts, or damage to the
cable’s internal elements.

• To avoid disturbing others nearby, try to keep the

unit’s volume at reasonable levels.

• The sound of keys being struck and vibrations

produced by playing an instrument can be
transmitted through a floor or wall to an
unexpected extent. Please take care not to cause
annoyance to others nearby.

• When you need to transport the unit, package

it in the box (including padding) that it came
in, if possible. Otherwise, you will need to use
equivalent packaging materials.

• Use only the specified expression pedal (EV-5,

EV-7; sold separately). By connecting any other
expression pedals, you risk causing malfunction
and/or damage to the unit.

• The usable range of D-BEAM controller will

become extremely small when used under strong
direct sunlight. Please be aware of this when using
the D-BEAM controller outside.

Handling CDs / DVDs

• Avoid touching or scratching the shiny underside

(encoded surface) of the disc. Damaged or dirty
CD/DVD discs may not be read properly. Keep your
discs clean using a commercially available CD/
DVD cleaner.

Copyrights/Licences/Trademarks

• Before you open the included CD-ROM or

DVD-ROM, you must read the “license agreement.”

Opening the CD-ROM or DVD-ROM will be taken to

mean your acceptance of the license agreement.

• MMP (Moore Microprocessor Portfolio) refers to a

patent portfolio concerned with microprocessor

architecture, which was developed by Technology

Properties Limited (TPL). Roland has licensed this

technology from the TPL Group.

• Microsoft product screen shot(s) reprinted with

permission from Microsoft Corporation.

• Roland and SuperNATURAL are either registered

trademarks or trademarks of Roland Corporation in

the United States and/or other countries.

• Cakewalk and SONAR are either registered

trademarks or trademarks of Cakewalk, Inc. or

Roland Corporation in the United States and/or

other countries.

• Company names and product names appearing

in this document are registered trademarks or

trademarks of their respective owners.

Copyright © 2012 ROLAND CORPORATION
All rights reserved. No part of this publication may
be reproduced in any form without the written
permission of ROLAND CORPORATION.

«
...
5
6
7
8
9
...
»

Содержание A-88

































































Отзывы:

Нет отзывов

Похожие инструкции для A-88

Бренд: Zagg Страницы: 24

DEATHSTALKER V2

Бренд: Razer Страницы: 9

Бренд: Safe Fleet Страницы: 38

Бренд: BOW Страницы: 6

Бренд: M-Audio Страницы: 114

Бренд: Nokia Страницы: 8

Power Keyboard SU-42

Бренд: Nokia Страницы: 8

Бренд: STEAMAX Страницы: 44

Бренд: STEAMAX Страницы: 87

Бренд: Mercedes-Benz Страницы: 12

Бренд: lifetrack Страницы: 9

Бренд: Targus Страницы: 15

Бренд: Sanako Страницы: 172

ZONE TRAINER SE331

Бренд: Oregon Scientific Страницы: 113

Бренд: Peloton Страницы: 6

iConnectIH-K231MS

Бренд: iHome Страницы: 14

Бренд: SteelSeries Страницы: 32

Бренд: Precor Страницы: 144

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды